Need help!
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: ???
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Need help!
Is there a faq on how to install, knock sensor and o2 sensor? I searched and came up empty. I'm just sick and tired of getting raped by mechanics and would like to do it myself!
Thanks
Thanks
#3
Hamado things my way!
Join Date: Oct 2001
Location: Pensacola, Florida
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
This isn't very hard to do. For the O2 sensor, you take the intake hoses off to get access to it. Then you either get a wrench or O2 sensor socket (although I'm not sure if the socket will clear the frame) and unscrew the sensor. Then you unplug the electrical connector from the wiring harness near the middle of the back of the UIM.
For the knock sensor, remove the intake elbow. And right next to the #1 rotor sparkplugs is a big nut/sensor that is the knock sensor. I can't look at my car right now to tell you exactly where it is, but you will see it. loosen it with a wrench, and disconnect the electrical connector behind the alternator. Let me know if you need more help.
--Danny
For the knock sensor, remove the intake elbow. And right next to the #1 rotor sparkplugs is a big nut/sensor that is the knock sensor. I can't look at my car right now to tell you exactly where it is, but you will see it. loosen it with a wrench, and disconnect the electrical connector behind the alternator. Let me know if you need more help.
--Danny