I was needing a favor can anyone tell me what these wires go to and if they are important.

The one to the left has a female end on it. its black w/ a yellow stripe,

the one to the right was wrapped with rubber insulator and it had two small wires one green and one white. I have no clue were they go to. Any help would be greatly appreciated..

 

i can't see ****!!! the pics are kind o blury that said there is a fan diagnostic plug that is not used that hangs there

 

Can you take a better pic, and or better describe where the wires are coming from? There are a lot of harnesses and all kinds of wiring down there.

 

please stop using your cellphone to take pictures

 

that's funny $hit Lt. Commander Georgi LaForge.

Sorry guys I knew the picts were blurry I need to get a better digi cam, 1 megapixel aint helping any. But thanks for your help.

I'll try to describe best I can there was black, w/ yellow stripe wire coming out of the ecu plug wire harnesses with a female plug thats the one to the left, it is reading 11-12 volts of power on my multimeter, and there was a green and yellow wire that both came out of a strand of rubber insulation coming from under were the glove box was, no power to either wire thats the one to the right? It wont help if I take more pictures cuz thats as clear as my camera gets. But thanks again for your guy's help.

I guess basically what I want to know is, if my ecu has all the connections made. I plugged the 4 yellow plugged harnesses in the back and then one black plugged harness into this black little box labeled control module, and then grounded the two black wires onto the bolt in the front, does that sound right?

 

sounds right...you've got a pm