3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need to check ignition system...

Old Feb 19, 2002 | 12:07 PM
  #1  
ejmack1's Avatar
Thread Starter
Lawn Ornament
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
Need to check ignition system...

What are good things to check??? It's runnin real rough... Compression check came back good...
Reply
Old Feb 19, 2002 | 12:23 PM
  #2  
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 291
Likes: 0
From: The 'Nati, Ohio
Did you just do the vacuum hose job?

Make sure the boost/map sensor is hooked up.

Fouled plugs.

Leak at a gasket somewhere....

Hose not connected correctly..

Patrick
Reply
Old Feb 19, 2002 | 12:36 PM
  #3  
Dr Wankel's Avatar
Altitude SUCKS!!!
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 805
Likes: 0
From: Fort Collins, Colorado
Check your coils. I found one that had cracked and the inside of the plug wire had become welded to the inside of it.
Reply
Old Feb 19, 2002 | 12:44 PM
  #4  
ejmack1's Avatar
Thread Starter
Lawn Ornament
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
Originally posted by pweizman
Did you just do the vacuum hose job?

Make sure the boost/map sensor is hooked up.

Fouled plugs.

Leak at a gasket somewhere....

Hose not connected correctly..

Patrick
Vacuum hose job was done a while ago, everthing is fine...
Plugs are good...
No gasket leaks....
Hoses are connected properly...
Already checked all normal problems...
Reply
Old Feb 19, 2002 | 12:50 PM
  #5  
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 291
Likes: 0
From: The 'Nati, Ohio
Bad gas?

Bad coil / coil wire harness...

Patrick
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Vendor Classifieds
1
Sep 7, 2015 03:44 PM
SakeBomb Garage
SakeBomb Garage
1
Sep 7, 2015 03:32 PM
SakeBomb Garage
SakeBomb Garage
0
Sep 4, 2015 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
Sep 4, 2015 05:19 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:26 AM.