So I'm going to be getting a new clutch and I figured I'd get a flywheel while I am having the motor put back together. I need some advice on what clutch and flywheel to go with.

I use my 7 as a daily driver so I know I what to go with a clutch that is more forgiving; however, my rebuild is a street port and planning on pushing 350+ whp, so I need something on the stronger side.

As for the flywheel I've used ACTs on my hondas, but not sure if its the way I want to go with my 7.

Thanks for the help

 

replace all three at once

preussure plate
flywheel
clutch

you will be more happy, I did not do this and have pulled my engine three times trying to fix it and it still slips.

 

the act fly doesn't have the ability to slap a new fiction disc on, I had one and just bought the fidanza 8lb fly where you can swap fiction discs.

 

I'd go with the ACT street/strip clutch (comes with disc, pressure plate, release bearing, and pilot bearing) and either the ACT prolite or streetlight flywheels. That would be a very streetable combo that will handle the power levels you want.