Need to adjust TPS after removal of double throttle?
08-07-09, 03:55 AM
#1
Need to adjust TPS after removal of double throttle?
So I removed my double throttle control the other night. Since then the PFC has been complaining about the VTA1 sensor.
The sensor is reading 4.88v.
Is it usual to have to adjust this after removal of the double throttle controls?
Or is it something I could have accidentally knocked?
Thanks in advance
Ceylon.
The sensor is reading 4.88v.
Is it usual to have to adjust this after removal of the double throttle controls?
Or is it something I could have accidentally knocked?
Thanks in advance
Ceylon.
08-07-09, 04:44 AM
#2
Senior Member
iTrader: (6)
Join Date: Jan 2008
Location: Montreal , Canada
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
closed Throttle ur supposed to get ( idle screw out ) .75-1.25 or might see a 1.35-150 with the idle screw in .. on the 2nd wire from the top and ~5V at WOT
chek with a multimeter
chek with a multimeter
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
