chiaoliu88

Hi Guys!

Here is the deal, I am an RX-7 'Newbie' and I'm in the process of making reliability modifications... But I ran into a slight conundrum.

I'm getting a triple A-pillar gauge mount and I'm planning on installing a water-temp gauge as well as a turbo gauge. I'm unsure what I should get for the third slot. Currently, the car has no mods but I am planning on getting a down-pipe and a cat-back system within the next few months.

Any suggestions?

7_rocket

iTrader: (6)

Thats the only 2 necessary gauges you would need for a mildy modded car

SLOASFK

iTrader: (5)

Those are the only nessecary gauges, however I'd suggest getting either an EGT gauge or an oil temp gauge for the third slot. Both are equally as important as a water temp gauge. Remember, oil cools the rotating assembly, not water.

dgeesaman

iTrader: (7)

I would only buy the oil temp if you plan to track the car. For a street driven car, boost and water temp handle the most important needs.

Dave