My turn in the barrel *NO 56K*
Trending Topics
Rotary Enthusiast
Joined: Feb 2001
Posts: 1,094
Likes: 0
From: Orange County, CA
Originally Posted by weaklink
thanks, actually gunmetal. volk le37k's 18s 
You could use a washer under the passanger side rubber mount.
Thread Starter
Resident Retard
Joined: Apr 2001
Posts: 1,918
Likes: 0
From: Cockaigne
Originally Posted by atihun
Looks great! Nice hood! Where did you get that?
You could use a washer under the passanger side rubber mount.
You could use a washer under the passanger side rubber mount.
BTW for those that don't know, the hood came from atihun (shameless plug).
Last edited by weaklink; Apr 3, 2005 at 11:20 PM.
Thread Starter
Resident Retard
Joined: Apr 2001
Posts: 1,918
Likes: 0
From: Cockaigne
I have a feed type 2 spoiler in the garage. debating on whether or not to put it on. paint the ends white and I'm gonna leave the center in the black carbon fiber. look for test fit pics in the future, hopefully this weekend.
Rotary Enthusiast
Joined: Feb 2001
Posts: 1,094
Likes: 0
From: Orange County, CA
LOL, gota get it when you can!
Either a washer, or you may need to adjust/move the hood latch hold-down slightly to the passanger side. Sometimes, if the latch is pulled to one side, the opposite side of the hood will sit lower.
Either a washer, or you may need to adjust/move the hood latch hold-down slightly to the passanger side. Sometimes, if the latch is pulled to one side, the opposite side of the hood will sit lower.
Originally Posted by weaklink
heheh, wondered if anyone was gonna comment on the gap. so a washer under the passenger side would fix her up eh?
BTW for those that don't know, the hood came from atihun (shameless plug).
BTW for those that don't know, the hood came from atihun (shameless plug).
