thanks, I was just playing around btw
montego blue is definitely an acquired taste... |
Originally Posted by Farkel
(Post 9210961)
montego blue is definitely an acquired taste...
I wished my Montengo blue would look BLUE, like in thouse pictures.... not greenish Keep up the project!:icon_tup::icon_tup: |
Seeing these pictures, I would love to get your life...
It's a good show on my screen. Keep up good work! |
Just a quick question ... I'm in the process of building a duck for my Greddy SMIC. I'm just modifying the stock one. Should I leave the opening to the a/c condenser and battery or block it off?
|
It is fine to leave it. Those parts like some air flow.
|
YIKES! Can you come live with me for a while? Your amazing work makes me want to go nuts on cleaning things.
Thanks for the pics I am gonna sleep good tonight |
The image quality is absolutely STELLAR! Extremely nice work.
|
Originally Posted by gracer7-rx7
(Post 9223019)
It is fine to leave it. Those parts like some air flow.
|
So this is what I've been screwing around with for the past couple of days. Not too bad considering I don't really have the proper tools to build something like this. Just in case anyone was wondering, it's made out of a piece of stainless steel from a old dish washer. I used some tin snips, pliers, a vice and a hammer to build it. It would have be nice to have a plasma cutter and a proper metal bender.
Fabricated IC Duct for Greeddy SMIC: https://i426.photobucket.com/albums/...t/DSC_0807.jpg https://i426.photobucket.com/albums/...t/DSC_0809.jpg https://i426.photobucket.com/albums/...t/DSC_0812.jpg https://i426.photobucket.com/albums/...t/DSC_0813.jpg https://i426.photobucket.com/albums/...t/DSC_0815.jpg https://i426.photobucket.com/albums/...t/DSC_0816.jpg https://i426.photobucket.com/albums/...t/DSC_0817.jpg https://i426.photobucket.com/albums/...t/DSC_0821.jpg |
Nice.
|
So I installed the UIM, TB, compression tube. Finished up the vacuum hose job. Install all new sensors for some Defi gauges. Painted the strut bar. Golf season is finally here, so things are going a little bit slower.
Test Fit IC Duct: https://i426.photobucket.com/albums/...c/DSC_0826.jpg https://i426.photobucket.com/albums/...c/DSC_0829.jpg https://i426.photobucket.com/albums/...c/DSC_0830.jpg https://i426.photobucket.com/albums/...c/DSC_0833.jpg Strut Bar (painted): https://i426.photobucket.com/albums/...c/DSC_0838.jpg Oil Temp Sensor: https://i426.photobucket.com/albums/...c/DSC_0844.jpg Water Temp Sensor: https://i426.photobucket.com/albums/...c/DSC_0848.jpg Boost sensor: https://i426.photobucket.com/albums/...c/DSC_0850.jpg |
beautiful.
you really need to post a HOW-TO for polishing. im headed home this weekend, and i think i might have a go at polishing the UIM...but i would love to see your method w/ pics if possible. keep up the amazing work!!! |
Everything looks amazing. Keep the updates coming!
|
Wow man! I wish I can make my engine bay look this good! Sucks for me that I don't know how to do metal polishing and that I have no room or time to tear the FD appart to do all this!
|
It looks like it came off the showroom floor !
|
I've been busy the past couple of weeks. I went on vacation, visited with family and friends, did a little fishing and played a few rounds of golf. Now I'm back and ready to get this thing back on the road. So .... I got the IC installed. The duct actually fit pretty good. I had to figure out how to mount my aftermarket AST. After playing around with it for a bit I finally came up with a pretty simple mount. Tell me what you think. I also installed the strut bar and engine brace. All I have left is to mount the twin power, run a couple ground wires, try to polish the front cooling plate and then I should be able to see if it'll start. Then it's on to the interior ....
Greddy SMIC (installed): https://i426.photobucket.com/albums/...c/DSC_1522.jpg https://i426.photobucket.com/albums/.../DSC_1522a.jpg https://i426.photobucket.com/albums/...c/DSC_1524.jpg https://i426.photobucket.com/albums/...c/DSC_1526.jpg https://i426.photobucket.com/albums/...c/DSC_1531.jpg https://i426.photobucket.com/albums/...c/DSC_1538.jpg https://i426.photobucket.com/albums/...c/DSC_1540.jpg |
AST Bracket:
https://i426.photobucket.com/albums/...c/DSC_1541.jpg https://i426.photobucket.com/albums/...c/DSC_1543.jpg https://i426.photobucket.com/albums/...c/DSC_1544.jpg AST (installed): https://i426.photobucket.com/albums/...c/DSC_1548.jpg https://i426.photobucket.com/albums/...c/DSC_1549.jpg https://i426.photobucket.com/albums/...c/DSC_1558.jpg |
Cheap Battery Cover:
https://i426.photobucket.com/albums/...c/DSC_1562.jpg https://i426.photobucket.com/albums/...c/DSC_1563.jpg Strut Bar and Engine Brace: https://i426.photobucket.com/albums/...c/DSC_1570.jpg |
so clean great job on your FD, looks amazing
|
amazing work, buddy. Just amazing!
|
Can someone help me pick my jaw up from the floor it fell somewhere around the first page.
|
Well I got a little side tracked. I was changing one of the dust boots on the front brakes (cause I ripped it when I painted them last year) and wouldn't you know it, while I was putting the tire back on I nicked the nice paint job that held up so well for the past year. I masked it up a did a little touch up. In between coats I took some pictures of my next project (the interior). I've done a few things already since I bought it. I just have a couple things left to do and it will be done as well. Then on to the exterior ...
Interior when I first bought it: https://i426.photobucket.com/albums/...64_14_full.jpg https://i426.photobucket.com/albums/...64_15_full.jpg https://i426.photobucket.com/albums/...464_8_full.jpg https://i426.photobucket.com/albums/...464_9_full.jpg https://i426.photobucket.com/albums/...64_11_full.jpg https://i426.photobucket.com/albums/...464_7_full.jpg |
great Job!!!
i think all of us wonder how you made the polishing and a few pictures of your tooling and a few lines "how to" would be very interesting and helpfull. it is the most amazing polishing i ever seen... |
Interior now (repainted all interior plastics) After 2 years it has held up pretty well:
https://i426.photobucket.com/albums/...8/DSC_1676.jpg https://i426.photobucket.com/albums/...8/DSC_1603.jpg https://i426.photobucket.com/albums/...8/DSC_1606.jpg https://i426.photobucket.com/albums/...8/DSC_1670.jpg https://i426.photobucket.com/albums/...8/DSC_1671.jpg https://i426.photobucket.com/albums/...8/DSC_1631.jpg Back Seats: https://i426.photobucket.com/albums/...8/DSC_1604.jpg https://i426.photobucket.com/albums/.../DSC_1603a.jpg Seat Belt Holder (recovered with cf film): https://i426.photobucket.com/albums/...8/DSC_1680.jpg Original Floor Mats (still in good condition): https://i426.photobucket.com/albums/...8/DSC_1688.jpg Razo Pedals: https://i426.photobucket.com/albums/...8/DSC_1620.jpg Dome Light (changed to LED) and Broadway Mirror: https://i426.photobucket.com/albums/...8/DSC_1644.jpg |
All times are GMT -5. The time now is 03:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands