This is my last idea I have...
12-11-02, 05:02 PM
#1
The Spirit of FLUFF!
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: East Highland, CA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
This is my last idea I have...
Ok, from those of you that have been helping me from the beginning of buying my car, you all know that my car hasn't been running very well. I have one last idea that what it might be. I think my leading ignition coil has gone bad, this would explain why it turns but doesn't start and why it drives like crap. That's my last idea of what the problem is, so I'm going to take it down to them and tell them to look and test that first if that's not it then I'll be done and leave it up to them to find the problem. I want to know what you guys think about my idea, do you think I could possibly be right? It's my best shot at what it could be. Input is greatly appreciated.
12-11-02, 06:11 PM
#3
The Spirit of FLUFF!
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: East Highland, CA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
........well if you think about it dude, real hard you'll realize it's a stick and then say, "o....he has a 5-speed and he rolled it down a hill and "jump" started it by popping the clutch" hehe just kidding, yeah it's a 5-speed and that's what I did to get it to start. Read my other posts by searching for my name to get other info on what's been happening because I don't feel like explaining it all over again. The engine "turns and everything looks and sounds like it's going/trying to start, but it doesn't. There's your explanation.
12-11-02, 06:14 PM
#4
real smart *** remark for someone trying to get help from a much more experienced owner
all you have seemed to do so far is break your car
just go have a compression test done already...damn
and btw the search feature hasn't been working for quite a while now
all you have seemed to do so far is break your car
just go have a compression test done already...damn
and btw the search feature hasn't been working for quite a while now
12-11-02, 06:18 PM
#5
The Spirit of FLUFF!
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: East Highland, CA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
HEY look, I didn't break the car! I bought it that way and have been trying to fix it back to running condition! I bought it as a project car, and it wasn't running at the time, so I have to say I'm doing FINE! Don't be an ******* to me......I've tried to be nice, I said j/k and was messin with him, damn calm the F*&^ down! I was just messin around and I'm gettin it fixed, I asked to see if u guys thought that was a good idea, not tell me to get a compression test. DAMN! I don't need a compression test! They are fixing for god's sake back off!
Last edited by RX7SpiritR; 12-11-02 at 06:22 PM.
12-11-02, 06:21 PM
#6
The Spirit of FLUFF!
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: East Highland, CA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
and o yeah I forgot about the search feature, sorry about that. I just plain forgot. I hope we get along in the future, don't want to make any enemies here just friends..........I'm just going to have it fixed, I'll talk to ya guys later. =)
12-11-02, 06:24 PM
#7
Blow up or win
Originally posted by RX7SpiritR
........well if you think about it dude, real hard you'll realize it's a stick and then say, "o....he has a 5-speed and he rolled it down a hill and "jump" started it by popping the clutch" hehe just kidding, yeah it's a 5-speed and that's what I did to get it to start. Read my other posts by searching for my name to get other info on what's been happening because I don't feel like explaining it all over again. The engine "turns and everything looks and sounds like it's going/trying to start, but it doesn't. There's your explanation.
........well if you think about it dude, real hard you'll realize it's a stick and then say, "o....he has a 5-speed and he rolled it down a hill and "jump" started it by popping the clutch" hehe just kidding, yeah it's a 5-speed and that's what I did to get it to start. Read my other posts by searching for my name to get other info on what's been happening because I don't feel like explaining it all over again. The engine "turns and everything looks and sounds like it's going/trying to start, but it doesn't. There's your explanation.
If you don't feel like explaining it to one of the smartest guys on the forum (TurboJeff) then you don't deserve to own it! Talk about 'tude! What a punk. 18 years old, right?...
Next post will be " I wrecked my 7 last night".
Trending Topics
thats all i have to say.
12-11-02, 06:57 PM
#10
Originally posted by RX7SpiritR
........well if you think about it dude, real hard you'll realize it's a stick and then say, "o....he has a 5-speed and he rolled it down a hill and "jump" started it by popping the clutch" hehe just kidding, yeah it's a 5-speed and that's what I did to get it to start. Read my other posts by searching for my name to get other info on what's been happening because I don't feel like explaining it all over again. The engine "turns and everything looks and sounds like it's going/trying to start, but it doesn't. There's your explanation.
........well if you think about it dude, real hard you'll realize it's a stick and then say, "o....he has a 5-speed and he rolled it down a hill and "jump" started it by popping the clutch" hehe just kidding, yeah it's a 5-speed and that's what I did to get it to start. Read my other posts by searching for my name to get other info on what's been happening because I don't feel like explaining it all over again. The engine "turns and everything looks and sounds like it's going/trying to start, but it doesn't. There's your explanation.
I DID read some of your old thread. Umm and your a f#%kin' DUMBASS. I figured since you were starting a new thread you might try to help yourself. Can't find the master cylinder, huh?
Punks like you are so stupid you can't even ask for help right. Then when someone asks a question to help your dumb *** out, for FREE, you come back with a smart *** answer.
"it runs like crap but won't start" "it doesn't run very well"
I think I've found your problem, pull your **** covered head out of your ***, IF you know where either one of those things are.
Jeff
12-11-02, 07:09 PM
#11
Senior Member
iTrader: (3)
Join Date: Aug 2001
Location: Medford, OR
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
I think it is fairly safe to say that this guy (rx7spirit) is not worth anyone's time. I tried to help him before too and he did the same thing to me. What a dumbass.
I guess he keeps starting new threads about his problem so he can try to hide the bullshit he is saying to others that try to help. I am thinking it's about time for him to get a new screen name.
I've got an idea Einstein. Do the FD community a favor and throw your computer out the window. We will all be greatful.
Done.
I guess he keeps starting new threads about his problem so he can try to hide the bullshit he is saying to others that try to help. I am thinking it's about time for him to get a new screen name.
I've got an idea Einstein. Do the FD community a favor and throw your computer out the window. We will all be greatful.
Done.
12-11-02, 07:22 PM
#12
Blow up or win
Originally posted by turbojeff
I wasn't gonna be a smart *** but since I tried to help and you give me a smart *** answer, I'll roast you back.
I DID read some of your old thread. Umm and your a f#%kin' DUMBASS. I figured since you were starting a new thread you might try to help yourself. Can't find the master cylinder, huh?
Punks like you are so stupid you can't even ask for help right. Then when someone asks a question to help your dumb *** out, for FREE, you come back with a smart *** answer.
"it runs like crap but won't start" "it doesn't run very well"
I think I've found your problem, pull your **** covered head out of your ***, IF you know where either one of those things are.
Jeff
I wasn't gonna be a smart *** but since I tried to help and you give me a smart *** answer, I'll roast you back.
I DID read some of your old thread. Umm and your a f#%kin' DUMBASS. I figured since you were starting a new thread you might try to help yourself. Can't find the master cylinder, huh?
Punks like you are so stupid you can't even ask for help right. Then when someone asks a question to help your dumb *** out, for FREE, you come back with a smart *** answer.
"it runs like crap but won't start" "it doesn't run very well"
I think I've found your problem, pull your **** covered head out of your ***, IF you know where either one of those things are.
Jeff
"**** covered head!"
12-11-02, 07:34 PM
#13
hahahha I'm sure he's sorry now guys
spirit try to ask in a nicer fashion and respect your elders
nobody's really mad just be cool
btw your car sounds like it is really messed up but if I remember correct the motor is almost brand new just a few hundred miles? I agree with you that you should have it checked out by a pro since your examination of the patient may be causing more damage.
Sorry about your car and your first experiences with it.
Good Luck!
Snook
spirit try to ask in a nicer fashion and respect your elders
nobody's really mad just be cool
btw your car sounds like it is really messed up but if I remember correct the motor is almost brand new just a few hundred miles? I agree with you that you should have it checked out by a pro since your examination of the patient may be causing more damage.
Sorry about your car and your first experiences with it.
Good Luck!
Snook
12-11-02, 10:20 PM
#15
Eats, Sleeps, Dreams Rotary
Bye SpiritR! ... Dood, take a chill pill...everyone here are always so helpful...I can understand that you are really frustrated with you car but it still doesn't warrant mouthing off with smart *** comments... Guess my theory of everyone on the forum being cool goes down the drain 
Thread
Thread Starter
Forum
Replies
Last Post