3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

My first Rx7! What u think!?

Thread Tools
 
Search this Thread
 
Old May 31, 2007 | 10:49 AM
  #26  
CasperIV's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 1,079
Likes: 0
From: Jefferson, OR
You have a nice car, please don't blow it up. Read through these forums before you jump on ebay and buy "cool" stuff for it. These guys are serious about the boost creep, it will cost you another engine if your not careful.

What cars have you driven before this? You might want to go get some lessons if this is your first sports car with more then 200HP.... wet road + new car = dead 7.
Reply
Old May 31, 2007 | 10:50 AM
  #27  
weaklink's Avatar
Resident Retard
Tenured Member 20 Years
 
Joined: Apr 2001
Posts: 1,918
Likes: 0
From: Cockaigne
Originally Posted by NissanConvert
We've already discussed the exhaust (needs a cat), AST and the boost gauge. 2.6L is how they measure it over there. *shrugs*
I doubt the car truly has a straight through exhaust in the terms that you're thinking of. More likely it has a stainless catback with a "straight through" design muffler. I doubt this guy has to worry about boost creep. I have heard you can do three mods before you have to worry and this guy seems to have only one.
Reply
Old May 31, 2007 | 10:57 AM
  #28  
BLKTOPTRVL's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: Jul 2001
Posts: 1,817
Likes: 16
From: South Carolina
If you cannot afford the ~$300+ US for a boost controller, be sure to search this site for a "manual boost controller." -- Very inexpensive.
Reply
Old May 31, 2007 | 11:03 AM
  #29  
JDB88's Avatar
Junior Member
 
Joined: May 2007
Posts: 16
Likes: 0
From: London, England
Originally Posted by MADDSLOW
Is this serious, or a joke? Why the hell would they measure it as 2.6?
insurance companys rate it as a 2.6 litre engine so they dont make the mistake of selling a 17 yr old cheap car insurance



also alot of people seem to think that each rotor dispaces 1.3L so combined the total engine is 2.6....newbs





nice 7 mate
Reply
Old May 31, 2007 | 11:40 AM
  #30  
dave99uk's Avatar
Thread Starter
DavieL
 
Joined: May 2007
Posts: 16
Likes: 0
From: glasgow scotland
thnx for all input. In regards to the person that said something like "so many things wrong with that car, good luck with your project" can u elaborate a little to help me. Is there really that much wrong with it with its standard engine with only mod being exhaust? If so it might put me off buying it.
Reply
Old May 31, 2007 | 11:47 AM
  #31  
ferragame's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2002
Posts: 153
Likes: 0
From: PA
Buy it if you like it. But read the FAQs posted here. And don't mod it if you don't know what you're doing because you will blow it up.....eventually.

Personally I like the Veilside front. Not a fan of the wing but to each their own, as long as you like it, who cares what others think.

The FD is not a Civic and does not take kindly to half assed attempts at mods so be careful before you start messing with it. Personally, if you like it, leave it stock and enjoy it. But as mentioned earlier, get the piece that connects the intercooler duct with the stock air box.

As for the motor, the reason why people are giving you a hard time about posting it as a 2.6L is because I think most on this board are in the U.S. and its rated as a 1.3 L here (thats where the "13" in 13b comes from). So its just ignorance on some of us in the states that the motor is rated differently in some other markets.

Terry
Reply
Old May 31, 2007 | 02:43 PM
  #32  
SiKoPaThX's Avatar
Porque tan serio?
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jun 2002
Posts: 1,932
Likes: 0
From: St. Petersburg, FL
Originally Posted by dave99uk
thnx for all input. In regards to the person that said something like "so many things wrong with that car, good luck with your project" can u elaborate a little to help me. Is there really that much wrong with it with its standard engine with only mod being exhaust? If so it might put me off buying it.


1. That's the duct for your intake box. That duct is supposed to go inside the box to deliver fresh cool air.

2. That hole in your duct (it's supposed to be there, but there's a part your missing that blocks it up) is letting out the air that is supposed to be forced through your intercooler. The way it is now, your intercooler is getting a very small amount of air going through it.

3. That's the stock AST. We would all recommend you replace it with a metal version, as the stock one has a chance of cracking, causing you to lose coolant and overheat.

I would start there.
Reply
Old May 31, 2007 | 02:57 PM
  #33  
veilsidei's Avatar
Veilsidei
Tenured Member 10 Years
 
Joined: Feb 2006
Posts: 350
Likes: 0
From: Las Vegas
Originally Posted by MADDSLOW
Is this serious, or a joke? Why the hell would they measure it as 2.6?
they think its a 4 rotor
Reply
Old May 31, 2007 | 04:30 PM
  #34  
dgeesaman's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: May 2002
Posts: 12,313
Likes: 27
From: Hershey PA
The stock AST isn't garbage, but it does have a finite lifespan. After several years the plastic weakens and can burst.

You can install a new stock AST every 50k, or just put in an all-metal AST or AST deletion kit. All of these three options is equally justifiable.

Dave
Reply
Old May 31, 2007 | 08:54 PM
  #35  
NissanConvert's Avatar
Please somebody help!!!
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2005
Posts: 1,442
Likes: 0
From: Woodridge, IL
Originally Posted by weaklink
I doubt the car truly has a straight through exhaust in the terms that you're thinking of. More likely it has a stainless catback with a "straight through" design muffler. I doubt this guy has to worry about boost creep. I have heard you can do three mods before you have to worry and this guy seems to have only one.
The addition of a 3” straight through stainless steel exhaust is all we have done but what a difference it has made! The car burbles away and sounds as good as it looks.
Well, I'd rather err on the side of paranoia. He should have a boost gauge just to diagnose boost issues anyway; and getting it on a lift won't hurt anything. If it is "straight through" then it's downpipe, midpipe (boost issues on a stock engine), and cat back. that's three. if it's just downpipe & cat back then he's probably safe but the stock ecu can only control up to 10psi and some 7's get 11ish psi with those mods.

What i would do:

1) Read all of the buyers guide posts, all of the applicable stickies, etc.
2) Get the car on the lift to confirm everything.
3) Order an AST & Boost gauge
4) replace the plastic or block off the bit above the intercooler.
Reply
Old Jun 1, 2007 | 12:06 AM
  #36  
joeydinc's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 136
Likes: 0
From: San Luis Obispo Ca.
lol 2.6..... stock intake mani........ impressive mod!!!!


they probably just made a mistake
Reply
Old Jun 1, 2007 | 03:11 AM
  #37  
clayne's Avatar
PV = nRT
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 2,250
Likes: 0
From: New Zealand (was California)
Nice color, but seriously ditch the body mods.

Also, sikopathx rockin' the classic C2s!
Reply
Old Jun 1, 2007 | 03:23 AM
  #38  
TwinJDMSnails's Avatar
Full Member
 
Joined: Feb 2007
Posts: 61
Likes: 0
From: Vancouver, Canada
if you are tight on cash.. i wouldn't recommend a rx7... they like money.. and lots of it
Reply
Old Jun 1, 2007 | 03:37 AM
  #39  
dave99uk's Avatar
Thread Starter
DavieL
 
Joined: May 2007
Posts: 16
Likes: 0
From: glasgow scotland
Cheers for constructive posts, ill start with AST and boost gauge by looks of it.
Reply
Old Jun 1, 2007 | 11:27 AM
  #40  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
See Post #32, you are missing the plastic cover that connects those two openings.
Reply
Old Jun 1, 2007 | 01:32 PM
  #41  
Montego's Avatar
Don't worry be happy...
Tenured Member: 20 Years
Loved
Community Favorite
Top Answer: 1
iTrader: (1)
 
Joined: Apr 2001
Posts: 6,901
Likes: 842
From: San Diego, CA
Originally Posted by SiKoPaThX


3. That's the stock AST. We would all recommend you replace it with a metal version, as the stock one has a chance of cracking, causing you to lose coolant and overheat.

actually I would start with #3. That AST is about to burst! I wouldn't even drive that thing until I changed that. To either an Aluminium one or a NEW stock one.

Me personally I would choose the new stock one because I am not a fan of the aftermarket ones. My old one (pettit madeit) didn't seal properly (which would cause overflow tank issues every couple of months) for years until I found my culprit.
Went back to stock and all problems were gone

Originally Posted by dgeesaman
The stock AST isn't garbage, but it does have a finite lifespan. After several years the plastic weakens and can burst.

You can install a new stock AST every 50k, or just put in an all-metal AST or AST deletion kit. All of these three options is equally justifiable.

Dave

so yeah +1.

If it's black it's all good. If the AST = greenish black it's time to change it. If it's rather green you are living on borrowed time. The one in the picture is seriously scary looking.
Reply
Old Jun 1, 2007 | 01:39 PM
  #42  
Robbierx7's Avatar
Full Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Apr 2004
Posts: 244
Likes: 0
From: UK. Birmingham
How the hell have you managed to get insurance on an fd at 19? My nephew is paying £1300 on a 1.4golf, so it's gonna cost you over £4000 mate. When i had my fd at the age of 24, a lot of insurance companys would not insure me on it. Gotta be over 30 blah blah blah. It is a group 20 car. Thats the same group as a escort cossie,ferrari etc. Most of the members on here are from the usa. If your looking for a uk forum try www.mazdarotaryclub.com or www.fduk.org. There are a few members up scotland/glasgow way. Nice car though man ESPECIALLY AT 19!!!!!
Reply
Old Jun 1, 2007 | 02:01 PM
  #43  
JDB88's Avatar
Junior Member
 
Joined: May 2007
Posts: 16
Likes: 0
From: London, England
well if you take the body kit, alloys and exhaust off u can go to quinn direct and get an absolute bargain!!


they dont insure modders, but if your car is stock they should bring the insurance down ALOT
Reply
Old Jun 1, 2007 | 02:07 PM
  #44  
hus's Avatar
hus
Lazyman
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 811
Likes: 0
From: Muscle Shoals, Alabama
Don't change the Veilside stuff unless you don't like. Many people here believe it's the worst kit (and/or front end) you can buy for the FD but I think it looks pretty good on your FD. Love the color to!
Reply
Old Jun 1, 2007 | 02:46 PM
  #45  
driFDer's Avatar
Senior Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: May 2004
Posts: 538
Likes: 0
From: socal
Originally Posted by MADDSLOW
Is this serious, or a joke? Why the hell would they measure it as 2.6?
Its a long debate. Some look at it as a 2.6L, some 1.3L:

https://www.rx7club.com/showthread.p...acement+rotary
Reply
Old Jun 1, 2007 | 02:55 PM
  #46  
10thAnnBeast's Avatar
88 turbo Project
 
Joined: Feb 2007
Posts: 158
Likes: 0
From: Providence, RI
That wing is for supras and eclipses, that **** looks disgusting, and all bodykits make me throw up so.......
Reply
Old Jun 1, 2007 | 03:44 PM
  #47  
dave99uk's Avatar
Thread Starter
DavieL
 
Joined: May 2007
Posts: 16
Likes: 0
From: glasgow scotland
Na i dont mind the car the way it looks i wont be changin it. Its a headturner at moment anyway. Specially cause im rather young to be driving it and the candy red in the sun its beatiful. Btw the photo in that magazine was taken in 2005 but it wasnt working and recently went to rotay specialist who has it all working now, So theres actualyl a high chance that the AST etc has been replaced. Cause surely they woulda noticed that if all you guys did. If not looked under bonnet yet cause i havent poicked up car yet.
Reply
Old Jun 1, 2007 | 03:48 PM
  #48  
hus's Avatar
hus
Lazyman
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 811
Likes: 0
From: Muscle Shoals, Alabama
Originally Posted by 10thAnnBeast
That wing is for supras and eclipses, that **** looks disgusting, and all bodykits make me throw up so.......
Well then, you better get ya a bucket!
Reply
Old Jun 1, 2007 | 05:18 PM
  #49  
TRWeiss1's Avatar
LSx 7.0L
Tenured Member 10 Years
iTrader: (20)
 
Joined: Apr 2007
Posts: 1,109
Likes: 2
From: Binghamton, NY
Congrats on the new 7!

@ the "2.6l" motor.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM




All times are GMT -5. The time now is 04:32 AM.