here is a pic, the tubing is temporary, i have yellow silicone coming soon that will replace what is there now



the concept was to vent the crv and bov with a mini k&n, but I only wanted to use one filter, so I plumbed the 2 lines together with some plumbing parts from homedepot

note: there is contradicting information on weather you need to filter these, they are supposed to be 'venting' only but some state otherwise...however, i wanted them filtered becasue they tend to blow a bit of oil mist and it was making a bit of a mess...in either case, a filter solves both the issues.


comments welcome...

 

wow man, you are on a roll....does the filter muffle the sound of the BOV? is that the same type of thing (tubes & piping) that they use on the pettit intake?

 

Damian: i bet your BOV will be on stealth mode...
make sure you secure the hoses as the small filter might rub against the k&n filter...

Yellow y pipe??

 

jhnrx7, the bov/crv sounds are not muffled very much, I still get loud PSSSSTT!!! when i let off the gas..... (love that sound)...also can hear the crv venting the secondary pretty loud too, I dunno if it is the same tubing as pettis intake, might be....I dunno much about other intakes, there is only a few other 3rd gens in my area. The connection piping is just home depot parts and the nasty tubing will be replaced with 1" yellow silicon tubing once I get the setup how I want it.

cihuuy, like i mentioned above, the BOV (and other venting) is still pretty loud, the lil k&N filter worked perfect....and you are right, I do need to secure it eventualy so there is no bouncing around in there... I pained my y pipe for fun, didnt come out very well, I need to redoe it with a layer of primer first, just playin around on that since my silicone is yellow :-)