Which Multi Spark Discharge/Distributor would you recommend?

Jacob’s Rotary FC1000
HKS Twin power
MSD 6A

 

HKS Twin Power. I have the MSD and it's a pain in the butt to install and I still haven't gotten it to run right. The HKS Twin Power comes with a harness making it almost truly plug and play. Plus it's smaller so it's easier to mount.

 

HKS Twin Power. Took 10 minutes to install. Cleared up all my break up at higher RPMs without pulling fuel out. I like it.

 

Thanks Gents..I really appreciate it.

 

Crane HI-6R !

 

Thanks Gents..I really appreciate it. BTW. What`s the cost on a HKS TWIN power and where can I get one?

 

I second the hks twin power. I believe Gotham Racing, RX7store.net, and lots of other online tuner shops offer them. They usually run around $550 which includes the harness.

 

I run an MSD 6A with an FC leading coil. This setup is inexpensive ($100 used) and it cleared up the high-rpm breakup I had with the stock ignition system at 12psi. I recently dyno'd with no break-up at 15psi. It's also smog/CARB legal (fwiw, the HKS isn't).

patrick