3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

motor mounts

Thread Tools
 
Search this Thread
 
Old Mar 10, 2008 | 10:37 PM
  #1  
rollingsband1's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jan 2008
Posts: 208
Likes: 0
From: warfield
motor mounts

can you use 2 passanger side motor mounts on your fd? since its steel and not aluminum i figured it would be stronger etc.. however would this cause an oil leak by running two passanger side mounts rather than the correct ones?
Reply
Old Mar 10, 2008 | 10:44 PM
  #2  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Similar question. Check my post in here:

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/any-tips-motor-mounts-732335/
Reply
Old Mar 10, 2008 | 11:06 PM
  #3  
rollingsband1's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jan 2008
Posts: 208
Likes: 0
From: warfield
thanks again mahjik.. so basically it will bolt up and work but chances are ill have an oil leak. well crap.. what am i to do.. to remedy this..
Reply
Old Mar 10, 2008 | 11:15 PM
  #4  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by rollingsband1
thanks again mahjik.. so basically it will bolt up and work but chances are ill have an oil leak. well crap.. what am i to do.. to remedy this..
Not necessarily. To be honest, there is always the possibility of a leak. However, many people have used 2 passenger side mounts without an issue. I just bring that up so people make an informed decision on what to do with their car.
Reply




All times are GMT -5. The time now is 10:24 AM.