3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Is the motor blown?

Old Jul 25, 2004 | 03:00 PM
  #1  
cooljerk187's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 120
Likes: 0
From: IN
Unhappy Is the motor blown?

Hey guys big situation, and im hoping my motor is not blown .. but it sure sounds like a possibilty. I first was sitting with a cracked radator, then i purchased the KOYO unit, along with the AST, and new mazda hoses (upper and lower radator. So, today when i first start the car up after the installs, i burp the system plenty of times, and go for the full drive. I didnt even have the car fully warmed up yet, when i realize smoke is comming from a few areas, underneath the turbo, and behind the UIM, and it was enouigh smoke that is was seeping through the rats nest and the front of the IM. I look under the car, and there is a very decent size puddle of coolant, with more commin at a constant drip... any ideas as to what happend?
Reply
Old Jul 25, 2004 | 03:07 PM
  #2  
silver93's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 712
Likes: 0
From: winston-salem, nc
it's not the engine. if it was, it would idle REALLY rough and vibrate and shake.

sounds like a coolant hose has popped off or something. take off the UIM and look around.
Reply
Old Jul 25, 2004 | 06:07 PM
  #3  
Fatman0203's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 05 Years
 
Joined: May 2003
Posts: 3,639
Likes: 0
From: MIA
Somehow, somewhere hoses are cracked. Search! (for the hoses), and you will find them. Easier would be get a pair of pliers, with a full system with an alright amount of pressure and squeeze the line to see if its leaking. The one behind the UIM sounds like its the coolant line that goes through the UIM. The turbo one, I have no idea since Im still having the same problem.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whinin
Introduce yourself
17
Mar 30, 2019 07:53 PM
doritoloco
New Member RX-7 Technical
7
Sep 5, 2015 12:41 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:47 AM.