3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

More Exhaust Questions

Thread Tools
 
Search this Thread
 
Old 04-27-03, 06:09 PM
  #1  
Senior Member

Thread Starter
 
nickpapagiorgio's Avatar
 
Join Date: Feb 2003
Location: Voorhees, NJ
Posts: 506
Likes: 0
Received 0 Likes on 0 Posts
More Exhaust Questions

I just installed the racing beat dual tip exhaust and I have two questions. 1. It was sunday and no parts stores were open so I just reused my old gasket, is this OK or should I get a new one?? 2. After I hung the new exhaust, I noticed that the seam on the muffler canister (which sticks out about 1.5cm) was touching the heat shield next to the gas tank. I looked and from what I coudl tell, the heat shield is about 1 cm away from the gas tank, is this OK?? Thanks for the help
-Kevin
By the way, the racing beat exaust sound great.
Old 04-27-03, 06:49 PM
  #2  
Cheap Bastard

iTrader: (2)
 
adam c's Avatar
 
Join Date: Sep 2002
Location: San Luis Obispo, Ca
Posts: 8,370
Received 50 Likes on 42 Posts
The gasket is probably OK. You should have it checked for leaks to be sure. The fit isn't right. You should have more clearance. When you take it to check for leaks, see if something can be done to lower the exhaust just a little.

I like my RB exhaust too.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
12abridgeport
1st Generation Specific (1979-1985)
2
08-17-15 06:28 PM



Quick Reply: More Exhaust Questions



All times are GMT -5. The time now is 04:10 PM.