Mines ECU. worth it?
#1
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Tbilisi
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Mines ECU. worth it?
Anybody heared of mines ecu for FD? is it worth buying? Seller says its tested and yuned for setup similar to mine. http://cgi.ebay.com/ws/eBayISAPI.dll...tab%3DWatching
#3
Need a tune
Join Date: Aug 2006
Location: Paris (France)
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
I have similar ECU but other brand (Knightsport) and it works great. However I never diagnosed with a wideband and checked if my A/F ratio was OK along the rpm range. I need to do that.
Good things is that it eliminated fuel cut.
Pay attention that the octane rate is quite high in Japan, in France I can fuel up with 98 so I think I'm pretty safe. I would not install this running with lower octane.
Good things is that it eliminated fuel cut.
Pay attention that the octane rate is quite high in Japan, in France I can fuel up with 98 so I think I'm pretty safe. I would not install this running with lower octane.
#4
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Tbilisi
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
I have JDM car and i was told pettit will not work with mine so i started searching for JDM. Power FC is good but its expensive and there are no tuners in my country thats why i'm staying away from it for now.
Oliv
what mods are you runing and how much boost? what power do you make?
I have access to AI 98 fuel (you guys in USA have RON?)
Oliv
what mods are you runing and how much boost? what power do you make?
I have access to AI 98 fuel (you guys in USA have RON?)
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM