McMaster Part number for O-Ring on FD T-body
#1
Locust of the apocalypse
Thread Starter
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
McMaster Part number for O-Ring on FD T-body
Dunno if you guys already know this as I don't meddle around on this forum much (S4 TII dude) BUT... I was doing a polish job on a FD T-body and the O-ring that seals the elbow was shot, so i took a shot at one from McMaster.. And I got it!!!
Part number is 9452 k312
4.489 id x 4.629 od ( equates to 1.75mm thick!!!)
and its 4.48 for a pack of 10!!!
Cheers
Part number is 9452 k312
4.489 id x 4.629 od ( equates to 1.75mm thick!!!)
and its 4.48 for a pack of 10!!!
Cheers
#2
Locust of the apocalypse
Thread Starter
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
I guess i should have said that i already orderd a pack of these o-rings and have actually test fitted them, and they fit exactly like the stock o-ring. (well, when the stock O-Ring wasn't samshed flat and hard as a rock!!!)
#5
Locust of the apocalypse
Thread Starter
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
LOL... Yeah...
If anybody else wants one, they can send me a Self Addressed Stamped Envelope, with a buck in it, and I'll send ya an O-ring back inthe envelope!!!
If anybody else wants one, they can send me a Self Addressed Stamped Envelope, with a buck in it, and I'll send ya an O-ring back inthe envelope!!!
Trending Topics
#9
il Cosa Nostra e vivo!!
iTrader: (1)
Join Date: May 2003
Location: Dove le cose sono fatte il vecchio moda il senso
Posts: 2,097
Likes: 0
Received 0 Likes
on
0 Posts
Should've checked this thread a little earlier. I just ordered one from Ray at a cost of $12.30 for the little sucker.
Also ordered the y-pipe o-ring for $6.50. Ouchy Mama!!!
Also ordered the y-pipe o-ring for $6.50. Ouchy Mama!!!
Last edited by areXseven; 11-28-05 at 01:21 PM.
#10
Locust of the apocalypse
Thread Starter
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by dgeesaman
Will the buck still be in the SASE?
Dave
Dave
Ummmmmm Yeah... Shure.... tell ya what... put a $20 in there... and I PROMISE that will still be in there too!!!!!
#11
Locust of the apocalypse
Thread Starter
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by areXseven
Should've checked this thread a little earlier. I just ordered one from Ray at a cost of $12.30 for the little sucker.
Also ordered the y-pipe o-ring for $6.50. Ouchy Mama!!!
Also ordered the y-pipe o-ring for $6.50. Ouchy Mama!!!
12.50?????????????? Holy GOD man.....
I need to get my hands on a Y pipe O-Ring!!!!
#12
Locust of the apocalypse
Thread Starter
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
OH YEAH....
The 4.48 per 10 are Buna-N O rings... they make them in Viton and all that Jazz... But.. Why??? Its not like its sealing a gas line.......
And when these are gone..... You better BET I'll be selling the Y-pipe and the T-body o-ring on E-bay as a set for about 7.50 a pop!!!!
The 4.48 per 10 are Buna-N O rings... they make them in Viton and all that Jazz... But.. Why??? Its not like its sealing a gas line.......
And when these are gone..... You better BET I'll be selling the Y-pipe and the T-body o-ring on E-bay as a set for about 7.50 a pop!!!!
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM