Maybe some of you have run into this problem?
#1
And going broke...so fast
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Location: Big Spring, TX
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Maybe some of you have run into this problem?
I've been trying to get my FD on the road since I bought it a few months back.
Well we finally swapped the Jspec in and got it started on it's own, but it will only start when it's cold. No hot starts...What gives?
It has a Denso pump, replaced all the wiring in the front of the car, tried 2 different sets of coils, tried 2 different OEM fuel rails/injectors. I also have a PFC and it's showing no codes. We also tried 2 different fuel pump relays...
Any help would be appriciated.
Thanks,
Dan
Well we finally swapped the Jspec in and got it started on it's own, but it will only start when it's cold. No hot starts...What gives?
It has a Denso pump, replaced all the wiring in the front of the car, tried 2 different sets of coils, tried 2 different OEM fuel rails/injectors. I also have a PFC and it's showing no codes. We also tried 2 different fuel pump relays...
Any help would be appriciated.
Thanks,
Dan
#5
And going broke...so fast
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Location: Big Spring, TX
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
I've done some searching through the OEM repair diagnostics and have come up with :
PRC valve ?
Charcoal canister (but emissions systems are removed from non seq. setup?)
Purge control vavle
Anyone else ran into problems like this?
PRC valve ?
Charcoal canister (but emissions systems are removed from non seq. setup?)
Purge control vavle
Anyone else ran into problems like this?
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM