BoostAddicted

Sup... I am trying to see what my twin turbos max out at.. What rwhp do they max out at.
I currently have..
Power FC
Apexi 3" Exhaust System
At 270rwhp

is all i have done to it now..
What do i need to be over 320rwhp+ on these twin setup..

thanks for all of your time

crazyrx7

All the bolt on, street ported motor at 12psi sequential turbo's I got 322rwhp.

R.K.

FD3S2005

iTrader: (11)

max the twins can handle is 15psi and youll need to get some bigger injectors, IC, ignition amp. and thats all i can think of atm

Qball

i got 333whp with no port at 13psi and then 348 with a port at 14psi with every single bolt on you can add.

Mahjik

iTrader: (1)

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/400rwh-w-engine-stock-turbos-non-seq-152271/

Northern7

iTrader: (1)

cia, 3" exhaust, power fc, unorthodox pully kit, STOCK INTERCOOLER, and injectors. 300 rwh @ 13.5 psi. The injectors maxed out 95% duty cycle. Steve Khan tuned.

neit_jnf

iTrader: (17)

it's possible to hit 400whp at 18~19psi with every bolt on.... once or twice hahahah

MADDSLOW

iTrader: (11)

18-19 psi on the stock twins, huh?

neit_jnf

iTrader: (17)

boostn7 got 402whp at 18psi at the above link

a friend of mine used to boost 20psi sequentially but the primary couldn't handle it and snapped the shaft.

i plan to tune to 18psi sequentially but only for drag races, hoping to get into the mid 11's

MADDSLOW

iTrader: (11)

Once I get to about 15, the air feels far too hot, and I can feel it slowing my car down.

ThoRx7

thats what 18psi could get u too only? hmmm i didnt know that? but sounds great tho...

FearNoPiston

iTrader: (17)

with the stock turbo's what do you expect? Keep in mind that is almost double what the car comes with stock with just bolt ons