manual boost controller
#3
Cheap Bastard
iTrader: (2)
If you have the Home Depot style controller, you open the valve to decrease boost. That would mean turning the valve counter-clockwise.
If you open it all the way, and the boost is still too high, you may need to drill out the holes (in the valve) a little bit to get additional air flow thru the valve.
If you open it all the way, and the boost is still too high, you may need to drill out the holes (in the valve) a little bit to get additional air flow thru the valve.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM