Major Engine Accessory R&R: Parts List w/Prices
#1
Major Engine Accessory R&R: Parts List w/Prices
I've been studying the forum, and the FSM planning a major R&R project for one of my FD's. Thought the information I have compiled may be useful to fellow forum members looking for part numbers and/or price information. Most of the parts listed are OEM, but not all. The "best price" column is what I have found comparing prices from many of the well known sources mentioned here on the forum. Are prices were obtained from the net, i.e. no direct quotes from suppliers.
Description Part Number Best Price
Engine Gasket Set 8DF6-10-271 $457.90
Rebuild turbos (kits only) $300.00
Clean, balance, blueprint primary injectors N3A1-13-250 $60.00
Clean, balance, blueprint secondary injectors N3A2-13-250 $60.00
Replace fuel pulsation damper N3A2-20-180 $122.54
Replace fuel pressure regulator N3A1-13-280 $100.00
Replace vacuum hoses & check valves $158.72
Replace lower radiator hose N3A1-15-185B $13.88
Replace upper radiator hose N3A1-15-186B $18.69
Replace turbo coolant hose #1 N3A1-13-536 $150.00
Replace turbo coolant hose #2 N3A1-13-54X $0.00
Replace AST to overflow bottle coolant hose N3A1-15-380C $0.00
Replace AST to radiator coolant hose N3A1-15-184A $0.00
Replace AST to neck coolant hose N3A1-15-183 $0.00
Replace upper throttle body coolant hose N3A1-13-681A $0.00
Replace lower throttle body coolant hose N3A1-13-691B $0.00
Replace water pump housing to hard line coolant hose (behind alternator) N3A1-13-692A $0.00
Replace block to firewall hard line coolant hose (driver side) FD01-61-213B $0.00
Replace heater core at firewall coolant hose FD01-61-212A $0.00
Replace water pump housing to hardline coolant hose (passenger side) FD01-61-214A $0.00
Replace hardline to heater core coolant hose (passenger side) FD01-61-211A 0.00
Replace thermostat & gasket 8AF6-15-1710 $11.95
Replace water pump & gasket N3A1-15-100A $85.00
Replace radiator cap D316-15-2050 $11.95
Replace spark plug wires $32.85
Replace spark plugs [(2) BUR7EQP , (2) BUR9EQP] $39.80
Replace oil $8.40
Replace oil filter G6Y0-14-302A $5.51
Replace oil pressure switch N3A1-14-8200 $82.04
Replace radiator fluid w/water wetter $9.00
Replace oxygen sensor (not OEM) N3A1-18-861A $40.00
Replace alternator/air pump belt N3Z1-18-3810 $35.32
Replace a/c belt N3A1-15-9080 $20.90
Replace clutch (pressure plate, disc, release brg, pilot brg, pilot brg seal) $235.04
Resurface flywheel $35.00
Rebuild clutch slave cylinder FD01-49-4600 $23.00
Rebuild clutch master cylinder B310-41-52Z0 $23.90
Replace brake master cylinder FD04-43-40ZR $174.72
Replace shifter bushing 0398-17-462A $5.19
Replace transmission fluid to Neo Synthetic 75WHD90 $38.95
Replace differential fluid to Neo Synthetic 75WHD90 $0.00
Eliminate accelerated warmup system (AWS) $0.00
Eliminate exhaust gas recirculation (EGR) valve $0.00
Upgrade fuel supply line to SS braided line $?
Upgrade fuel return line to SS braided line $?
Upgrade clutch line to SS braided line $20.16
Upgrade oil cooler lines to SS braided line $?
Upgrade oil metering lines to SS braided line $98.00
Upgrade air pipe to efini Y-pipe $235.00
Upgrade intercooler piping to aluminum $280.00
Replace pre-cat with downpipe $245.00
Replace stock muffler (Racing Beat Dual Tip) $550.00
Install boost gauge $225.00
Install water temperature gauge $225.00
Total Price (Parts only): $4238
The $0 pricing on some of the coolant hoses reflects that I bought a complete set from Ray Crowe @ Malloy Mazda for about $150.
Description Part Number Best Price
Engine Gasket Set 8DF6-10-271 $457.90
Rebuild turbos (kits only) $300.00
Clean, balance, blueprint primary injectors N3A1-13-250 $60.00
Clean, balance, blueprint secondary injectors N3A2-13-250 $60.00
Replace fuel pulsation damper N3A2-20-180 $122.54
Replace fuel pressure regulator N3A1-13-280 $100.00
Replace vacuum hoses & check valves $158.72
Replace lower radiator hose N3A1-15-185B $13.88
Replace upper radiator hose N3A1-15-186B $18.69
Replace turbo coolant hose #1 N3A1-13-536 $150.00
Replace turbo coolant hose #2 N3A1-13-54X $0.00
Replace AST to overflow bottle coolant hose N3A1-15-380C $0.00
Replace AST to radiator coolant hose N3A1-15-184A $0.00
Replace AST to neck coolant hose N3A1-15-183 $0.00
Replace upper throttle body coolant hose N3A1-13-681A $0.00
Replace lower throttle body coolant hose N3A1-13-691B $0.00
Replace water pump housing to hard line coolant hose (behind alternator) N3A1-13-692A $0.00
Replace block to firewall hard line coolant hose (driver side) FD01-61-213B $0.00
Replace heater core at firewall coolant hose FD01-61-212A $0.00
Replace water pump housing to hardline coolant hose (passenger side) FD01-61-214A $0.00
Replace hardline to heater core coolant hose (passenger side) FD01-61-211A 0.00
Replace thermostat & gasket 8AF6-15-1710 $11.95
Replace water pump & gasket N3A1-15-100A $85.00
Replace radiator cap D316-15-2050 $11.95
Replace spark plug wires $32.85
Replace spark plugs [(2) BUR7EQP , (2) BUR9EQP] $39.80
Replace oil $8.40
Replace oil filter G6Y0-14-302A $5.51
Replace oil pressure switch N3A1-14-8200 $82.04
Replace radiator fluid w/water wetter $9.00
Replace oxygen sensor (not OEM) N3A1-18-861A $40.00
Replace alternator/air pump belt N3Z1-18-3810 $35.32
Replace a/c belt N3A1-15-9080 $20.90
Replace clutch (pressure plate, disc, release brg, pilot brg, pilot brg seal) $235.04
Resurface flywheel $35.00
Rebuild clutch slave cylinder FD01-49-4600 $23.00
Rebuild clutch master cylinder B310-41-52Z0 $23.90
Replace brake master cylinder FD04-43-40ZR $174.72
Replace shifter bushing 0398-17-462A $5.19
Replace transmission fluid to Neo Synthetic 75WHD90 $38.95
Replace differential fluid to Neo Synthetic 75WHD90 $0.00
Eliminate accelerated warmup system (AWS) $0.00
Eliminate exhaust gas recirculation (EGR) valve $0.00
Upgrade fuel supply line to SS braided line $?
Upgrade fuel return line to SS braided line $?
Upgrade clutch line to SS braided line $20.16
Upgrade oil cooler lines to SS braided line $?
Upgrade oil metering lines to SS braided line $98.00
Upgrade air pipe to efini Y-pipe $235.00
Upgrade intercooler piping to aluminum $280.00
Replace pre-cat with downpipe $245.00
Replace stock muffler (Racing Beat Dual Tip) $550.00
Install boost gauge $225.00
Install water temperature gauge $225.00
Total Price (Parts only): $4238
The $0 pricing on some of the coolant hoses reflects that I bought a complete set from Ray Crowe @ Malloy Mazda for about $150.
#2
Eats, Sleeps, Dreams Rotary
iTrader: (14)
Ha - I've probably ordered 1/3 of the parts on this list in the past three months (y-pipe and downpipe are going in this weekend) and will order the other 1/3 in the next few months. My car has only 45k miles so I'm not going to go all out with the engine or turbo gasket set.
You missed two parts though:
I would replace the two large air hoses that attach to the y-pipe when you are upgrading to the Efini - these take a lot of heat; mine were very hard at the attachment point. P/Ns for these are: N3A1-13-766 ($16), N3A1-13-765 ($8).
Also, the vacuum hoses and check valve kit (N3A1-13-SHX) does not include all the 60 or so vacuum hoses that need to be replaced - it has 20 or so. In any case, silicone or Viton would probably be better than the stock rubber hoses when upgrading.
Two other things I would add are an upgraded radiator (Koyo, $350) and new oil pressure sender ($80).
The RB exhaust and aluminum pipes are really mods - they are not really R&R. Still, the total amount of money is significant. I've already spent $1k and will soon spend $1k more on R&R on a car I bought a few months ago.
You missed two parts though:
I would replace the two large air hoses that attach to the y-pipe when you are upgrading to the Efini - these take a lot of heat; mine were very hard at the attachment point. P/Ns for these are: N3A1-13-766 ($16), N3A1-13-765 ($8).
Also, the vacuum hoses and check valve kit (N3A1-13-SHX) does not include all the 60 or so vacuum hoses that need to be replaced - it has 20 or so. In any case, silicone or Viton would probably be better than the stock rubber hoses when upgrading.
Two other things I would add are an upgraded radiator (Koyo, $350) and new oil pressure sender ($80).
The RB exhaust and aluminum pipes are really mods - they are not really R&R. Still, the total amount of money is significant. I've already spent $1k and will soon spend $1k more on R&R on a car I bought a few months ago.
Last edited by moconnor; 01-20-05 at 01:29 AM.
#3
Originally Posted by moconnor
You missed two parts though:
I would replace the two large air hoses that attach to the y-pipe when you are upgrading to the Efini - these take a lot of heat; mine were very hard at the attachment point. P/Ns for these are: N3A1-13-766 ($16), N3A1-13-765 ($8).
I would replace the two large air hoses that attach to the y-pipe when you are upgrading to the Efini - these take a lot of heat; mine were very hard at the attachment point. P/Ns for these are: N3A1-13-766 ($16), N3A1-13-765 ($8).
Originally Posted by moconnor
Also, the vacuum hoses and check valve kit (N3A1-13-SHX) does not include all the 60 or so vacuum hoses that need to be replaced - it has 20 or so. In any case, silicone or Viton would probably be better than the stock rubber hoses when upgrading.).
Originally Posted by moconnor
Two other things I would add are an upgraded radiator (Koyo, $350) and new oil pressure sender ($80).
Originally Posted by moconnor
The RB exhaust and aluminum pipes are really mods - they are not really R&R.
#4
RX-7 Bad Ass
iTrader: (55)
That's a good list! There's a lot of things on the list that are somewhat optional - many things should be checked and replaced if it needs it.
Where did you get the pricing on the clutch kit? Is that a stock or aftermarket clutch?
For others looking at the list, this is by no means a "must-do" list for an engine swap. Many items are "while you are in there" items - some things may be good and not need a replacement. Also, a few things are upgrades - the braided OMP lines, for example. While I like the braided lines, it's MUCH cheaper for a set of stockers that will last about 100,000 miles - for the price of the braided lines, you can buy 2 sets of stockers.
Also, you don't need the FULL gasket kit unless you're rebuilding the engine yourself. With a reman, you just need the external gaskets - you don't need the water seals, engine O-rings, etc.
Anyhow, good stuff!
Dale
Where did you get the pricing on the clutch kit? Is that a stock or aftermarket clutch?
For others looking at the list, this is by no means a "must-do" list for an engine swap. Many items are "while you are in there" items - some things may be good and not need a replacement. Also, a few things are upgrades - the braided OMP lines, for example. While I like the braided lines, it's MUCH cheaper for a set of stockers that will last about 100,000 miles - for the price of the braided lines, you can buy 2 sets of stockers.
Also, you don't need the FULL gasket kit unless you're rebuilding the engine yourself. With a reman, you just need the external gaskets - you don't need the water seals, engine O-rings, etc.
Anyhow, good stuff!
Dale
#5
Originally Posted by DaleClark
That's a good list! There's a lot of things on the list that are somewhat optional - many things should be checked and replaced if it needs it.
Where did you get the pricing on the clutch kit? Is that a stock or aftermarket clutch?
For others looking at the list, this is by no means a "must-do" list for an engine swap. Many items are "while you are in there" items - some things may be good and not need a replacement. Also, a few things are upgrades - the braided OMP lines, for example. While I like the braided lines, it's MUCH cheaper for a set of stockers that will last about 100,000 miles - for the price of the braided lines, you can buy 2 sets of stockers.
Also, you don't need the FULL gasket kit unless you're rebuilding the engine yourself. With a reman, you just need the external gaskets - you don't need the water seals, engine O-rings, etc.
#6
Version 2 of the list.. updated with best price supplier, and a "things to check list" with references to pages in the FSM.
Description Part Number Best Price Supplier
Engine Gasket Set 8DF6-10-271 $457.90 www.rx7world.com
Rebuild turbos (kits only) $300.00 www.turbocity.com
Clean, balance, blueprint primary injectors N3A1-13-250 $60.00 wwww.rceng.com
Clean, balance, blueprint secondary injectors N3A2-13-250 $60.00
Replace fuel pulsation damper N3A2-20-180 $122.54 www.rx7world.com
Replace fuel pressure regulator N3A1-13-280 $100.00 www.mazdatrix.com
Replace vacuum hoses & check valves $158.72 www.mazdaformance.com
Replace lower radiator hose N3A1-15-185B $13.88 Malloy Mazda
Replace upper radiator hose N3A1-15-186B $18.69 Malloy Mazda
Replace turbo coolant hose #1 N3A1-13-536 $150.00 Malloy Mazda (all coolant lines)
Replace turbo coolant hose #2 N3A1-13-54X $0.00
Replace AST to overflow bottle coolant hose N3A1-15-380C $0.00
Replace AST to radiator coolant hose N3A1-15-184A $0.00
Replace AST to neck coolant hose N3A1-15-183 $0.00
Replace upper throttle body coolant hose N3A1-13-681A $0.00
Replace lower throttle body coolant hose N3A1-13-691B $0.00
Replace water pump housing to hard line coolant hose (behind alternator) N3A1-13-692A $0.00
Replace block to firewall hard line coolant hose (driver side) FD01-61-213B $0.00
Replace heater core at firewall coolant hose FD01-61-212A $0.00
Replace water pump housing to hardline coolant hose (passenger side) FD01-61-214A $0.00
Replace hardline to heater core coolant hose (passenger side) FD01-61-211A 0.00
Replace Y-pipe air hose #1 N3A1-13-766 $16.00
Replace Y-pipe air hose #2 N3A1-13-765 $8.00
Replace thermostat & gasket 8AF6-15-1710 $11.95 www.rx7.com
Replace water pump & gasket N3A1-15-100A $85.00 www.rx7.com
Replace radiator cap D316-15-2050 $11.95 www.rx7.com
Replace spark plug wires $32.85 www.mazdaformance.com
Replace spark plugs [(2) BUR7EQP , (2) BUR9EQP] $39.80 www.rx7.com
Replace oil $8.40
Replace oil filter G6Y0-14-302A $5.51 www.mazdaformance.com
Replace oil pressure switch N3A1-14-8200 $82.04 www.mazdaformance.com
Replace radiator fluid w/water wetter $9.00 www.rx7store.net
Replace oxygen sensor (not OEM) N3A1-18-861A $40.00 www.rx7.com
Replace alternator/air pump belt N3Z1-18-3810 $35.32 www.mazdatrix.com
Replace a/c belt N3A1-15-9080 $20.90 www.mazdatrix.com
Replace clutch (pressure plate, disc, release brg, pilot brg, pilot brg seal) $235.04 www.mazdaformance.com
Resurface flywheel $35.00
Rebuild clutch slave cylinder FD01-49-4600 $23.00 www.mazdatrix.com
Rebuild clutch master cylinder B310-41-52Z0 $23.90 www.mazdatrix.com
Replace brake master cylinder FD04-43-40ZR $174.72 www.mazdatrix.com
Replace shifter bushing 0398-17-462A $5.19 www.mazdatrix.com
Replace transmission fluid to Neo Synthetic 75WHD90 $38.95 www.mazdatrix.com
Replace differential fluid to Neo Synthetic 75WHD90 $0.00
Eliminate accelerated warmup system (AWS) $0.00
Eliminate exhaust gas recirculation (EGR) valve $0.00
Upgrade fuel supply line to SS braided line $?
Upgrade fuel return line to SS braided line $?
Upgrade clutch line to SS braided line $20.16 www.mazdatrix.com
Upgrade oil cooler lines to SS braided line $?
Upgrade oil metering lines to SS braided line $98.00 www.rx7.com
Upgrade air pipe to efini Y-pipe $235.00 www.mazdaformance.com
Upgrade intercooler piping to aluminum $280.00 Rotary Xecret 7
Upgrade to Koyo radiator $350.00
Replace pre-cat with downpipe $245.00
Replace stock muffler (Racing Beat Dual Tip) $550.00 www.racingbeat.com
Install boost gauge $225.00
Install water temperature gauge $225.00
Total Price (Parts only): $4612
The $0 pricing on some of the coolant hoses reflects that I bought a complete set from Ray Crowe @ Malloy Mazda for about $150.
Things to check...page reference in FSM
Test all solenoids in rat's nest
Test trailing coils
Test leading coils
Test alternator
Check oil pressure control valve spring free length D-13
Test oil nozzles D-17
Test fan relay E-13
Test crank angle sensor F-180
Test boost sensor F-181
Test throttle body sensor F-182
Test water thermosensor F-183
Test intake air thermosensor F-183
Test fuel thermosensor F-184
Test knock sensor F-185
Test power steering pressure switch F-186
Test stoplight switch F-186
Test neutral switch F-186
Test clutch switch F-187
Test 1-2 switch F-187
Any input from those experienced with this are welcome.
Description Part Number Best Price Supplier
Engine Gasket Set 8DF6-10-271 $457.90 www.rx7world.com
Rebuild turbos (kits only) $300.00 www.turbocity.com
Clean, balance, blueprint primary injectors N3A1-13-250 $60.00 wwww.rceng.com
Clean, balance, blueprint secondary injectors N3A2-13-250 $60.00
Replace fuel pulsation damper N3A2-20-180 $122.54 www.rx7world.com
Replace fuel pressure regulator N3A1-13-280 $100.00 www.mazdatrix.com
Replace vacuum hoses & check valves $158.72 www.mazdaformance.com
Replace lower radiator hose N3A1-15-185B $13.88 Malloy Mazda
Replace upper radiator hose N3A1-15-186B $18.69 Malloy Mazda
Replace turbo coolant hose #1 N3A1-13-536 $150.00 Malloy Mazda (all coolant lines)
Replace turbo coolant hose #2 N3A1-13-54X $0.00
Replace AST to overflow bottle coolant hose N3A1-15-380C $0.00
Replace AST to radiator coolant hose N3A1-15-184A $0.00
Replace AST to neck coolant hose N3A1-15-183 $0.00
Replace upper throttle body coolant hose N3A1-13-681A $0.00
Replace lower throttle body coolant hose N3A1-13-691B $0.00
Replace water pump housing to hard line coolant hose (behind alternator) N3A1-13-692A $0.00
Replace block to firewall hard line coolant hose (driver side) FD01-61-213B $0.00
Replace heater core at firewall coolant hose FD01-61-212A $0.00
Replace water pump housing to hardline coolant hose (passenger side) FD01-61-214A $0.00
Replace hardline to heater core coolant hose (passenger side) FD01-61-211A 0.00
Replace Y-pipe air hose #1 N3A1-13-766 $16.00
Replace Y-pipe air hose #2 N3A1-13-765 $8.00
Replace thermostat & gasket 8AF6-15-1710 $11.95 www.rx7.com
Replace water pump & gasket N3A1-15-100A $85.00 www.rx7.com
Replace radiator cap D316-15-2050 $11.95 www.rx7.com
Replace spark plug wires $32.85 www.mazdaformance.com
Replace spark plugs [(2) BUR7EQP , (2) BUR9EQP] $39.80 www.rx7.com
Replace oil $8.40
Replace oil filter G6Y0-14-302A $5.51 www.mazdaformance.com
Replace oil pressure switch N3A1-14-8200 $82.04 www.mazdaformance.com
Replace radiator fluid w/water wetter $9.00 www.rx7store.net
Replace oxygen sensor (not OEM) N3A1-18-861A $40.00 www.rx7.com
Replace alternator/air pump belt N3Z1-18-3810 $35.32 www.mazdatrix.com
Replace a/c belt N3A1-15-9080 $20.90 www.mazdatrix.com
Replace clutch (pressure plate, disc, release brg, pilot brg, pilot brg seal) $235.04 www.mazdaformance.com
Resurface flywheel $35.00
Rebuild clutch slave cylinder FD01-49-4600 $23.00 www.mazdatrix.com
Rebuild clutch master cylinder B310-41-52Z0 $23.90 www.mazdatrix.com
Replace brake master cylinder FD04-43-40ZR $174.72 www.mazdatrix.com
Replace shifter bushing 0398-17-462A $5.19 www.mazdatrix.com
Replace transmission fluid to Neo Synthetic 75WHD90 $38.95 www.mazdatrix.com
Replace differential fluid to Neo Synthetic 75WHD90 $0.00
Eliminate accelerated warmup system (AWS) $0.00
Eliminate exhaust gas recirculation (EGR) valve $0.00
Upgrade fuel supply line to SS braided line $?
Upgrade fuel return line to SS braided line $?
Upgrade clutch line to SS braided line $20.16 www.mazdatrix.com
Upgrade oil cooler lines to SS braided line $?
Upgrade oil metering lines to SS braided line $98.00 www.rx7.com
Upgrade air pipe to efini Y-pipe $235.00 www.mazdaformance.com
Upgrade intercooler piping to aluminum $280.00 Rotary Xecret 7
Upgrade to Koyo radiator $350.00
Replace pre-cat with downpipe $245.00
Replace stock muffler (Racing Beat Dual Tip) $550.00 www.racingbeat.com
Install boost gauge $225.00
Install water temperature gauge $225.00
Total Price (Parts only): $4612
The $0 pricing on some of the coolant hoses reflects that I bought a complete set from Ray Crowe @ Malloy Mazda for about $150.
Things to check...page reference in FSM
Test all solenoids in rat's nest
Test trailing coils
Test leading coils
Test alternator
Check oil pressure control valve spring free length D-13
Test oil nozzles D-17
Test fan relay E-13
Test crank angle sensor F-180
Test boost sensor F-181
Test throttle body sensor F-182
Test water thermosensor F-183
Test intake air thermosensor F-183
Test fuel thermosensor F-184
Test knock sensor F-185
Test power steering pressure switch F-186
Test stoplight switch F-186
Test neutral switch F-186
Test clutch switch F-187
Test 1-2 switch F-187
Any input from those experienced with this are welcome.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM