M2 Large/Pettit Coolcharge III question
M2 Large/Pettit Coolcharge III question
Is it possible to run a 51R size battery or something with atleast 450CCA with the above ICs without relocating to the bin?
Also is anyone runnign the efini-y pipe with these ICs? I've seen crispyRX7 do it with the CWC large but want to see some pics of the M2 large or Pettit Coolchage III.
Thanks
Also is anyone runnign the efini-y pipe with these ICs? I've seen crispyRX7 do it with the CWC large but want to see some pics of the M2 large or Pettit Coolchage III.
Thanks
You can squeeze an Hawker Odessey PC 680 gel battery in there next to the M2 Large Smic. You just have to offset the IC about an inch to the left. BTW, the Duct will also fit about 1" off center from the SMIC.
Originally posted by jpandes
You can squeeze an Hawker Odessey PC 680 gel battery in there next to the M2 Large Smic. You just have to offset the IC about an inch to the left. BTW, the Duct will also fit about 1" off center from the SMIC.
You can squeeze an Hawker Odessey PC 680 gel battery in there next to the M2 Large Smic. You just have to offset the IC about an inch to the left. BTW, the Duct will also fit about 1" off center from the SMIC.
Pic didn't work.
Last edited by jpandes; Apr 2, 2003 at 01:07 AM.
Ok, Figured it out! In order to post/embed a picture within a post, you have to make sure that the picutre file name does not have any numbers in it. So a file name of Engine(1).jpg or New 006.jpg will not work for posting here. So, even if you uploaded a the file: New 006 into a yahoo alblum, it won't work here. I had to edit the file name in my yahoo album. And then "point" the link. I'm such a newbie.
Just in case anyone else was wondering...
Last edited by jpandes; Apr 2, 2003 at 01:19 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM



