M2 hardpipes and CWR intake
06-19-02, 07:37 AM
#1
Full Member
Thread Starter
Join Date: Jul 2001
Location: MA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
M2 hardpipes and CWR intake
Does anyone know if the M2 intake hardpipes will work with an CWR intake?
The lower one was tough just with the OEM hose, I ended up using the McMaster-Carr hose.
The lower one was tough just with the OEM hose, I ended up using the McMaster-Carr hose.
06-19-02, 08:51 AM
#3
OG
The lower is always a tough one...sometime trimming is required...this pretty much goes for all hardpipe/intake kits combos...sometimes you get lucky...sometimes you dont
07-03-02, 12:50 PM
#4
Full Member
Thread Starter
Join Date: Jul 2001
Location: MA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I was hoping for a more definitive answer. I'm reluctant to shell out $285 for a "maybe fit". The rear wall of the CWR intake seems to be further back than most so it looks like the lower tube and couplers may be a bit of an optimistic fit.
07-03-02, 12:56 PM
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,840
Received 2,604 Likes
on
1,847 Posts
the upper should fit no problem, the lower is a tight squeeze on the m2 airbox, i dont know how different the cwr box is, ive never used it. if it was my money i would just get the upper pipe
mike
mike
