Kenjiryan

I bought my RX-7 shell that has seen better days... It's missing alot of things including the lower harness.. I bought a used super crispy main harness that I found diagrams for to make use of the ecu plugs atleast, so it's $100 not so wisely spent... but now I'm stuck on coming up the lower harness out of thin air... I'm sure there's the map on here somewhere! If anyone knows the thread please post the link.. I received irons and rotors from the pervious owner that look OK.. the housings on the other hand are gone... I found a canadian source https://www.rotaryengine.com/index.html that deals refurbished housings for $325 a pop and I'm going with atkins closing rebuild kit. This is going to be a slow build... Hopefully this will all pay off and I'll be a rotary owner in the end.

7krayziboi

iTrader: (15)

https://www.rx7club.com/3rd-generati...ctures-892648/

Kenjiryan

thanks 7krayzi that's some useful info there. So an fd3s has 3 seprate harnesses? Main harness with the injectors/tps, battery/trans harness, and ignition harness?

Mrmatt3465

iTrader: (10)

Yes. The ignition harness can be had new for $100 from Ray I believe. The other two are like $450 and $850?

Matt