Location of speedo wiring?
04-10-05, 09:08 PM
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Nov 2004
Location: Saugerties, NY
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Location of speedo wiring?
I just bought an fd with a fresh rebuild and i can't get the speedometer to work. also the back up lights don't work. i checked the wiring at the tranny and there is only one way to plug them in. any suggestions would be appreciated.
04-12-05, 08:19 AM
#7
It's VERY easy to pinch/break the wires on the speedo sensor, backup switch, etc when removing the tranny. Or if you have a bad engine mount or ppf, the motion of the tranny could smash them. The speedo sensor is usually less vulnerable, I think.
Unfortunately repairing these wires is difficult/impossible. You can see pics with my tranny rebuild writeup at www.davidgeesaman.com
Dave
Unfortunately repairing these wires is difficult/impossible. You can see pics with my tranny rebuild writeup at www.davidgeesaman.com
Dave
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
Coolant_Leak
3rd Generation Specific (1993-2002)
2
08-30-15 11:18 AM