I'm wondering what the location/color(s) of the stock coolant level sensor is on the harness plugs near the ecu. I think I have a bad wire somewhere in the harness itself and would rather run a new wire than try to fix the old one. Thanks in advance.
-Nic

 

no one knows?....

 

Brown with white stripe wire, goes through connectors X12 and X06, ending up at pin 3d on the #3 dash cluster connector. Check out iluvmyrx7.com, they have a complete wiring diagram and manual all online in PDF format, most useful.

 

Thanks, I was trying to access it last night but having problems hence the post.

 

Hmmm I tried that I believe. Those connectors are the blue ones correct? Grounded the brown with white stripe wire and it had no effect. The other sensor that could set it off is the same wire for the coolant temp correct? I'm lost and unfortunately I'm unable to pull the wiring diagram down right now.
-Nic

 

Ok so I need some help here. I checked both possible connections. Grounded both light is still there. Grounded the brown with white wire by the ECU still the buzzer remains.... I'm thinking the solder joint on the buzzer itself snapped somewhere behind the dash.... has anyone run a new wire before from the buzzer or something of that nature?