A little Oil Cooler Surprise
02-05-10, 12:31 AM
#1
A little Oil Cooler Surprise
My radiator is out of my car, again, as I need to modify the oil cooler lines with my new duals (thanks Fritz!) I am putting in. The fins on my stock cooler are bent and i have reconditioned my new ones so I figured I will pull it out as well. After taking the brake duct off the driver side I nearly get stabbed by this:
Now I have heard of dead birds, even a dead frog to be found in the undertray, but never did I expect a Box Cutter. How long its been there now is the question. Made me laugh and i had to share. RICKRX7, if you are still lurking here, I have your box cutter.
BTW, Dual Stock Oil Coolers isn't so difficult and running the hard lines is easy, especially when the radiator is out. If you plan on doing this I recommend removing the radiator. Give you a good reason to flush your coolant anyway
Now I have heard of dead birds, even a dead frog to be found in the undertray, but never did I expect a Box Cutter. How long its been there now is the question. Made me laugh and i had to share. RICKRX7, if you are still lurking here, I have your box cutter.
BTW, Dual Stock Oil Coolers isn't so difficult and running the hard lines is easy, especially when the radiator is out. If you plan on doing this I recommend removing the radiator. Give you a good reason to flush your coolant anyway
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM