Just installed RB Dual Tip, Have ?
#1
Full Member
Thread Starter
Join Date: Apr 2006
Location: Phoenix
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Just installed RB Dual Tip, Have ?
Hi guys...
I just installed my RB Dual Tip over the weekend and I love it. The sound, the smoother acceleration, and the power are great!
One question though... I noticed that the exhaust tips are larger in circumfrence than the stock tips and now over bumps, the tips are rattling against the tow hook/ring on that side of the car. How has anyone fixed this?
Also, would anyone be interested in the stock exhaust? It only has 26k miles on it and no rust. I don't know if I should put in the Classified section or not.
I just installed my RB Dual Tip over the weekend and I love it. The sound, the smoother acceleration, and the power are great!
One question though... I noticed that the exhaust tips are larger in circumfrence than the stock tips and now over bumps, the tips are rattling against the tow hook/ring on that side of the car. How has anyone fixed this?
Also, would anyone be interested in the stock exhaust? It only has 26k miles on it and no rust. I don't know if I should put in the Classified section or not.
Last edited by Seppeku; 09-05-06 at 10:35 AM.
Trending Topics
#9
RX-7 Bad Ass
iTrader: (55)
Are the stock hangers in place? The exhaust shouldn't move enough to hit the tiedown hook. You can manually move the exhaust by hand to see how much it moves, and double-check what the exhaust is tapping against.
I have also found that with some cheaper downpipes/midpipes, they don't fit properly and make the whole exhaust system line up goofy.
Dale
I have also found that with some cheaper downpipes/midpipes, they don't fit properly and make the whole exhaust system line up goofy.
Dale
#11
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EFS.O
Yep,my solution was to remove the tow hook.........
Actually those are shipping tie downs. Some dealers remove them some don't.
#12
Full Member
Thread Starter
Join Date: Apr 2006
Location: Phoenix
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
I have a downpipe, but it's not installed yet. Getting it coated first. So, everything is stock except for this catback and a drop in K&N.
Everything went in the stock location with the two hangers and the bracket on the passanger side of the exhaust.
Now it's happening just reving up, not idle, yet. How much vibration should be moving the tips?
I think I'll just remove them this weekend and call it good.
Everything went in the stock location with the two hangers and the bracket on the passanger side of the exhaust.
Now it's happening just reving up, not idle, yet. How much vibration should be moving the tips?
I think I'll just remove them this weekend and call it good.
Thread
Thread Starter
Forum
Replies
Last Post