JAX, FL: rear subframe toe-link tab repair
11-07-06, 02:10 PM
#1
JAX, FL: rear subframe toe-link tab repair
I curbed the rear-end and broke-off the tabs that holds the toe-link.
Has anyone fabricateed new tabs for the toe-link mount ?
Is this an easy repair ?
Any recommendations in JAX, FL, for a repair ?
:-( neil
Has anyone fabricateed new tabs for the toe-link mount ?
Is this an easy repair ?
Any recommendations in JAX, FL, for a repair ?
:-( neil
Last edited by M104-AMG; 11-07-06 at 02:16 PM.
11-07-06, 06:23 PM
#2
Senior Member
Join Date: Jun 2004
Location: Johnstown, PA
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Well, if your handy with a welder, just grind everything down to bare metal, bend the tabs back to original position, reweld, then spray the area with some paint/undercoat to prevent rust.
If your not, then take it to a fab shop, or any welding shop for that matter, they should be able to fix you up.
If your not, then take it to a fab shop, or any welding shop for that matter, they should be able to fix you up.
11-07-06, 10:13 PM
#3
RX-7 Bad Ass
iTrader: (55)
I think you're already taking this route, but I would replace the rear subframe. They're typically not hard to find or pricey, and that's a part that I would want to make sure was 100%.
Dale
Dale
11-07-06, 10:17 PM
#4
Yep, going to replace the rear subframe, but I need to do a good quality repair for my track session this weekend, doh!
Dale, do you have a lead on a 1994-1995 rear sub-frame in Florida ?
If not, I have a line on one in NJ.
Do you know if it will fit on a pallet ? How about estimated weight ?
Thanks,
:-) neil
Dale, do you have a lead on a 1994-1995 rear sub-frame in Florida ?
If not, I have a line on one in NJ.
Do you know if it will fit on a pallet ? How about estimated weight ?
Thanks,
:-) neil
Thread
Thread Starter
Forum
Replies
Last Post
