3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Interior door plastic assembly

Thread Tools
 
Search this Thread
 
Old 09-12-21, 07:56 PM
  #1  
Rotary Freak

Thread Starter
iTrader: (9)
 
Mazdabation's Avatar
 
Join Date: Sep 2002
Location: Ancaster Ontario, Canada
Posts: 2,775
Received 5 Likes on 4 Posts
Interior door plastic assembly

Does anyone by chance have pictures of the back of the door panels, or have their interior door panels off at the moment? I took my door panels apart and removed the plastics to do some work on them. All the screws looked the same when I removed them, but now I have noticed that there are some screws that are longer and with a bigger washer.

Also a few different ones with a black collar on them. I normally take pics but I forgot this time around...

Last edited by Mazdabation; 09-12-21 at 08:35 PM.
Old 09-16-21, 08:13 PM
  #2  
Rotary Freak

Thread Starter
iTrader: (9)
 
Mazdabation's Avatar
 
Join Date: Sep 2002
Location: Ancaster Ontario, Canada
Posts: 2,775
Received 5 Likes on 4 Posts
Anyone that can help with the interior door plastic assembly?

Also where did these screws with the black collar come from? I have three of them


Last edited by Mazdabation; 09-16-21 at 08:26 PM.
Old 09-17-21, 12:27 PM
  #3  
Original Owner

iTrader: (1)
 
Retserof's Avatar
 
Join Date: Mar 2005
Location: America's Dairyland
Posts: 549
Received 82 Likes on 61 Posts
Here are pics of the inside of the driver's side (left) door panel that was replaced on my 94 many years ago. Some of the plastic parts are missing, but I still counted at least 22 screws, but only a few bright ones -- most are black. Let me know if you want more close-ups.







The following 2 users liked this post by Retserof:
DaleClark (09-17-21), Mazdabation (09-20-21)
Old 09-17-21, 02:03 PM
  #4  
Lives on the Forum

iTrader: (26)
 
Redbul's Avatar
 
Join Date: Mar 2015
Location: B.C.
Posts: 5,054
Received 1,216 Likes on 947 Posts
The fat screws may be those for holding the passenger grab handle in place.
Old 09-20-21, 10:31 AM
  #5  
Junior Member

iTrader: (1)
 
dburks10's Avatar
 
Join Date: Aug 2010
Location: DFW, TX
Posts: 19
Received 0 Likes on 0 Posts
2 on the driver panel: one at top tip of the a/c vent, one at the rear of the map pocket
One on the passenger side its at the rear of the trim insert, mirroring the map pocket.

There is a U-shaped wedge that pulls the trim tight to the door panel for each screw

Last edited by dburks10; 09-20-21 at 10:31 AM. Reason: spelling
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mazdabation
3rd Gen General Discussion
3
09-13-21 01:14 PM
Snook
3rd Generation Specific (1993-2002)
19
01-08-03 07:33 PM



Quick Reply: Interior door plastic assembly



All times are GMT -5. The time now is 11:45 AM.