View Poll Results: Vote on what one you are seriously interested in buying:
I am interested in the radiator ducting
17
9.39%
I am interested in the underpanel/front splitter
34
18.78%
I am interested in both
130
71.82%
Voters: 181. You may not vote on this poll
interest in custom radiator ducting and undertray/front splitter combo?
#16
Need more sleep
iTrader: (1)
I might be interested if it is setup for a stock mount radiator with the a/c condensor in place ( I see you fabbed up your's with the p/s loop in place ).
For the v-mount crowd, I can see the v-mount working only if you leave the undertray off to vent the backside of the radiator. Please educate me if I'm off here.
For the v-mount crowd, I can see the v-mount working only if you leave the undertray off to vent the backside of the radiator. Please educate me if I'm off here.
#19
now im thinking the radiator ducting will some in two 'sizes' one for aftermarket noses and one for stock... looks like i can test fit on a ms gtc nose, there is a 99 spec nose over here and i may have a cwest nose around soon.....anyway, ill keep you guys posted after i make the first prototypes for my car.
#20
ok, the rad ducting is a bit more comples, so ill tackle that one later, anyway, we cut and drilled the underpanel/splitter today, it aluminum adn i will test it at BIR wednesday, however, in the end it will just be the template for the much lighter CF (or whatever) material. it looked awsome and covered the entire front bottom, ill have pics tomorrow night (forgot the cam today, doh)
#22
Full Member
Join Date: Oct 2001
Location: Minneapolis, Minnesota
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fatman0203
Any results on any high speed testing? Got some temps to feed back?
Originally Posted by damian
...i will test it at BIR wednesday...
#28
Originally Posted by su_maverick
stop with the flaming, geez.
Damian, I cant wait on the results on this. Any pricing ideas yet?
Damian, I cant wait on the results on this. Any pricing ideas yet?
#29
pics of prototype
Here are pics of our prototype template made out of aluminum:
before the undertray was installed, notice the massive gaps ont eh edges of the nose and by the oilpan:
this is what it looks like after we attached the prototype to my nose and body, notice the nice full
another shot
more of the coverage
this is a shot of how it acts as a front splitter also
more front splitter view
a shot of the temp mounting points, we talked about the final mounting points probably being in the same place as the stock undertray
before the undertray was installed, notice the massive gaps ont eh edges of the nose and by the oilpan:
this is what it looks like after we attached the prototype to my nose and body, notice the nice full
another shot
more of the coverage
this is a shot of how it acts as a front splitter also
more front splitter view
a shot of the temp mounting points, we talked about the final mounting points probably being in the same place as the stock undertray