Intercoolers and tubing
01-15-03, 05:05 PM
#1
None
Thread Starter
Intercoolers and tubing
This is more of an FYI and recognition of some Email I've been getting than anything else.
For both the medium and large intercoolers my current intent is to make available in the near future and at a minor additional cost a cast pipe to connect from the turbo Y pipe to both IC's that will fit with the airpump intact and not hit the hood etc. Depending on the additional cost to make a modified 2nd casting it may also be available to fit with the Efini Y pipe. The current non airpump tubing will still be the most efficient with respect to performance but there are apparently enough of you out there that would like the other option or the ability to change.
Kevin T. Wyum
P.S. If anyone has purchased or been solicited to purchase one of the Medium or Large IC designs directly from M2 Performance or Brian Richards please let me know.
For both the medium and large intercoolers my current intent is to make available in the near future and at a minor additional cost a cast pipe to connect from the turbo Y pipe to both IC's that will fit with the airpump intact and not hit the hood etc. Depending on the additional cost to make a modified 2nd casting it may also be available to fit with the Efini Y pipe. The current non airpump tubing will still be the most efficient with respect to performance but there are apparently enough of you out there that would like the other option or the ability to change.
Kevin T. Wyum
P.S. If anyone has purchased or been solicited to purchase one of the Medium or Large IC designs directly from M2 Performance or Brian Richards please let me know.
Last edited by Kevin T. Wyum; 01-15-03 at 05:08 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM