installing injectors - advice?
11-20-01, 10:10 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: winston-salem, nc
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
installing injectors - advice?
got my injectors back from RC -
1 was good, 2 were fair and 1 was dripping -
now they are all running at excellent with matched flows, etc...
anyway, i've got new o-rings and plan on installing the injectors this weekend. Any advice? i've read the manual and it seems pretty straight forward. i know to lube the orings with clean oil, and then to leak check after the install, so, other than that, if there are any tricks, speak up!
thanks
1 was good, 2 were fair and 1 was dripping -
now they are all running at excellent with matched flows, etc...
anyway, i've got new o-rings and plan on installing the injectors this weekend. Any advice? i've read the manual and it seems pretty straight forward. i know to lube the orings with clean oil, and then to leak check after the install, so, other than that, if there are any tricks, speak up!
thanks
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM