Installing HKS intakes
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2003
Location: Broadview Hts., Ohio
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Installing HKS intakes
have hard pipes... no other place for the other 4 hoses, as they were hooked up to the airbox. What do i do with the 4 other hoses?
#3
Senior Member
Join Date: Dec 2001
Location: Somewhere in California
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Here is what my HKS setup looks like. It came with the car when I bought it, so I dont know what parts the HKS kit came with.
You can see the big 1" hoses though if you look closely:
-The airpump is hooked up to the IC cover
-first intake is plugged up at the hardpipe, and hose has the HKS adapter thing that vents to atmosphere
-second intake pipe has the hose hooked up to the hard pipe
You can see the big 1" hoses though if you look closely:
-The airpump is hooked up to the IC cover
-first intake is plugged up at the hardpipe, and hose has the HKS adapter thing that vents to atmosphere
-second intake pipe has the hose hooked up to the hard pipe
Last edited by ludeowner; 09-09-03 at 06:41 PM.
#5
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2003
Location: Broadview Hts., Ohio
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
got them on thank god. after thinking about it for an hour, its was a hard pipe kit + hks filters. I had to relocate my apexi bov and buy some little filters for the airpump. but all in all its done and im inside sitting down thank god.
Cant wait to getto the downpipe install tommarow
The intake will come off in a bit
Any recommendations for a good fmic + radiator + intake setup ?
Cant wait to getto the downpipe install tommarow
The intake will come off in a bit
Any recommendations for a good fmic + radiator + intake setup ?
#6
Senior Member
Join Date: Dec 2001
Location: Somewhere in California
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by expl0d
Cant wait to getto the downpipe install tommarow
The intake will come off in a bit
Any recommendations for a good fmic + radiator + intake setup ?
Cant wait to getto the downpipe install tommarow
The intake will come off in a bit
Any recommendations for a good fmic + radiator + intake setup ?
If you want to keep your HKS intakes for a while, maybe you should check out the RX7fashion Apexi FMIC. You may want to ask around to see if it will work with your HKS intakes, but to me it looks like you'll be fine.
http://www.jrx7.com/fmicpics.htm
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM