I have some injectors that I bought from a forum member as 1200cc's bored out from 850's. When I look at the injectors themselves however, they have the number 1300 etched into them along with some other part/item numbers.

I could send them in to RC or someone for flowtesting, but I was wondering if anyone recognizes these. In the end I might send them in anyway.

Here's the pics:

Front side, Numbers are 'SNGX-1300' and then a 1 on the left and a 2 on the right.



Full size pic here.


Back side, 90152 on the left and 91161 on the right



Full size pic here.

Thanks in advance.

 

I believe RC is the only shop with the tools to bore out injectors. Call them up, describe the injectors to them, and see what they have to say. I bet they are with those markings on them.

Dale

 

Look like RC's work. Mine look the same way

 

Interesting. I sent a link to the pictures to RC too, to see if they know anything about them.

I will post any interesting information I recieve back.

Thanks.

 

They're 1300's from RC.
John

 

Just to close this out, as others here and RC themselves (who called me to confirm) have said these are indeed 1300cc injectors from RC Engineering.

Thanks to all.