Injector Identification Question
#1
Injector Identification Question
I have some injectors that I bought from a forum member as 1200cc's bored out from 850's. When I look at the injectors themselves however, they have the number 1300 etched into them along with some other part/item numbers.
I could send them in to RC or someone for flowtesting, but I was wondering if anyone recognizes these. In the end I might send them in anyway.
Here's the pics:
Front side, Numbers are 'SNGX-1300' and then a 1 on the left and a 2 on the right.
Full size pic here.
Back side, 90152 on the left and 91161 on the right
Full size pic here.
Thanks in advance.
I could send them in to RC or someone for flowtesting, but I was wondering if anyone recognizes these. In the end I might send them in anyway.
Here's the pics:
Front side, Numbers are 'SNGX-1300' and then a 1 on the left and a 2 on the right.
Full size pic here.
Back side, 90152 on the left and 91161 on the right
Full size pic here.
Thanks in advance.
#2
RX-7 Bad Ass
iTrader: (55)
I believe RC is the only shop with the tools to bore out injectors. Call them up, describe the injectors to them, and see what they have to say. I bet they are with those markings on them.
Dale
Dale
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM