i need to know if the injector kit from the rx7store.com need resistor or anything else to wire them up..... i bought the kit in pieces (thinking it would be a little cheaper) and ended up wasting more money thAN the price of the kit itself....

i have 850cc primary and 1600 cc secondarys ... so please if you have this kit please let me know what you used and what type or kind i need... thanks again...

 

It depends on what ecu you have...you should use resistors with the PFC. Other standalones might not have the current limitations on their injector drivers.

 

If you have the power fc they are 10 ohm 10 watt. I do beleive. anyother standalone you can change it its duty screens.

 

I believe jason sells the resistors as well.

 

If not Rx7.com sells the nice ones.

 

Why you have to put resistors?

 

so it doesn't burn out the injetor driver in the PFC