any body got a link to the easy ignition switch removal,i cant figure out how to take out the anti theft bolts holding on the switch body

 

Take a flat head screw drive and hammer into them untill there is a divit. Then just unscrew them like you would any bolt.

 

you ever have it crank sometimes and then sometimes have to turn on/off to get it to crank again,elusive problem cause it is ittermient

 

On both my cars it would click but the engine would never turn over and I would have to turn the key on and off and repush in the cluth. I thought it was the ignition switch but the clutch plug was actually problem, it was dry rotted. I ended up putting a bolt in there and now its fine. If thats not your problem its prob the ignition switch. Its not hard to replace though so if you still have the prob with the new switch then figure it out and put the old one back in and save the new one untill you need it for later.

 

Dremel a slot, then use a regular screw driver

later