if anyone needs 1000cc/96lb primary injectors
08-05-04, 11:15 AM
#1
Rotary Freak
Thread Starter
Join Date: Oct 2002
Location: Salem, IN
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
if anyone needs 1000cc/96lb primary injectors
i found a pretty good deal on them. i picked up some delphi units for $70 each from http://www.raceprovenmotors.com
08-05-04, 01:55 PM
#3
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
And what setup would ever require injectors that big? Most guys putting down over 400 rwhp are still on stock primaries or at most, 850cc primaries. I see zero reason to require a 1000cc primary, which will likely make low-speed driving very difficult to tune for.
08-05-04, 03:47 PM
#4
Rotary Freak
Thread Starter
Join Date: Oct 2002
Location: Salem, IN
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
sorry, i meant to say i'm using them in conjunction with the kgparts primary rail which i received today. they are low impedance like the bosch 1600's
rynberg, i have a t78 with a 550/1600 setup and i'm maxed out at 16psi. i want tuned for 21 and 26psi and needed some bigger primaries to do so. now let's just hope my fuel pump holds up
rynberg, i have a t78 with a 550/1600 setup and i'm maxed out at 16psi. i want tuned for 21 and 26psi and needed some bigger primaries to do so. now let's just hope my fuel pump holds up
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
Donald Hampton
2nd Generation Specific (1986-1992)
5
09-17-15 03:13 PM