3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Idle Problem?

Thread Tools
 
Search this Thread
 
Old Oct 20, 2002 | 11:42 AM
  #1  
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Dec 2001
Posts: 1,271
Likes: 0
From: UK
Idle Problem?

Hi, I am trying to find out a bit about the Idle problem i have with the Seven.

It has a Power Fc fitted with all the normal mods, recently the Air pump has been removed and the Idle does not like staying in one place.

You can get the car red hot and set it to 800rpm then its happy untill the next time you drive it and the revs will drop to somthing like 400rpm.

I know the method of seting the Idle with the wire trick but i cant help thinking its got somthing to do with the Lack of air pump? or could it be somthing like the Inlet temp sensor?

The engine is not old and has very good compresion which i would have thougt would help if anything?

Thanks.
Reply
Old Oct 20, 2002 | 03:07 PM
  #2  
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 39
Likes: 0
From: Old Lyme Connecticut
maybe leaking vac. hose? check your MAP sensor hose tight, I know when I had the same issue, my map hose was loose and the sensor was reading faulty. Just a thought.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 07:51 AM.