Idle Hunting
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2006
Location: Vancouver, BC
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Idle Hunting
Howdy guys and gals.
So i got my car tuned recently, and all went well.
But i have always had a problem even before the tune, where when i was driving, and take the car out of gear, and the rpm's drop to where the car should idle, it wont. It will blip up from 900-1400 constantly until the car stops moving.
Right when the car stops moving it will idle as it should @ 1100. I have a PFC, and the Idle settings on the PFC is at 1000.
any insight?
//m
So i got my car tuned recently, and all went well.
But i have always had a problem even before the tune, where when i was driving, and take the car out of gear, and the rpm's drop to where the car should idle, it wont. It will blip up from 900-1400 constantly until the car stops moving.
Right when the car stops moving it will idle as it should @ 1100. I have a PFC, and the Idle settings on the PFC is at 1000.
any insight?
//m
#3
rotorhead
iTrader: (3)
start by reading https://www.rx7club.com/3rd-generation-specific-1993-2002-16/how-make-your-untuned-pfc-basemap-safer-idle-better-no-datalogit-needed-841706/ posts #1, 23, 27, and especially #28
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM