I want to D.I.Y rx7 fd harness
#1
Senior Member
Thread Starter
I want to D.I.Y rx7 fd harness
Were I can found rx7 fd harness schematics and connectors so I can make my own better quality with silicon wires harness?
I have the complete work manual , electric schematics but didnt help.
Or if I can not found this schematics can I buy oem or better quality harness from Internet shop?Because I search ebay and other sites with rx7 parts but I can not find engine harness body harness etc
Thanks for help.
I have the complete work manual , electric schematics but didnt help.
Or if I can not found this schematics can I buy oem or better quality harness from Internet shop?Because I search ebay and other sites with rx7 parts but I can not find engine harness body harness etc
Thanks for help.
#2
development
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/electron-manipulation-336924/
you could buy a haltech, or Motec...but you still have to cut the old connectors off and rework/repair if necessary
Mazda Malloy (search for phone #) sells OEM
you could buy a haltech, or Motec...but you still have to cut the old connectors off and rework/repair if necessary
Mazda Malloy (search for phone #) sells OEM
#3
No it's not Turbo'd
Malloy Mazda probhably also sells the wireing digrams, there are a lot of wires, and from my experience, it's possible some of them are labeled incorrectly in the digram, like the Throttle position sensor, has two wires crossed....
if you want to make some to sell I'd suggest you buy one new harness, and start looking for / buying all the same plugs, and then start poking around with a multimeter... but after all that work, I'd doubt that anyone would pay more than 2X the original price for the factory harness... even if it were bulletproof...
-DC
if you want to make some to sell I'd suggest you buy one new harness, and start looking for / buying all the same plugs, and then start poking around with a multimeter... but after all that work, I'd doubt that anyone would pay more than 2X the original price for the factory harness... even if it were bulletproof...
-DC