I shopping for an aftermarket Turbos for my rx7
#1
Full Member
Thread Starter
Join Date: Apr 2002
Location: Cloverdale
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I shopping for an aftermarket Turbos for my rx7
Guys I have blown my stock turbos, here is my question should I Upgrade or get these stock Turbos rebuilt? How long does the rebuilt turbos last? anyhow I may decide to upgrade to higher performance turbos. I want to stick the sequential system, anybody know where I can shop for a higher performance sequential turbo system? I am in Canada so I am willing to spend 3600 Canadian tops because this how much its going to cost me to rebuild my stock twins, because the exhaust manifold on them is fucked so I need a new one. Has anybody compressor wheel on the stock turbos larger? I am thinking of getting that route done for I have heard that they spool up much faster.
#2
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Here's who I'd check out if I were you..
http://www.lourdsmusic.com/bnrsupercars/turbo9395.htm
I've dealt with them before, Bryan is a great guy with alot of knowledge and I'm sure if you have any questions about his upgrades he'll be more than happy to answer them.
You might want to see if you can find a used manifold with out a crack in it(probably like finding a needle in a haystack) or I'm not sure if you can have a crack in a turbo manifold "filled"..
http://www.lourdsmusic.com/bnrsupercars/turbo9395.htm
I've dealt with them before, Bryan is a great guy with alot of knowledge and I'm sure if you have any questions about his upgrades he'll be more than happy to answer them.
You might want to see if you can find a used manifold with out a crack in it(probably like finding a needle in a haystack) or I'm not sure if you can have a crack in a turbo manifold "filled"..
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM