I was installing my greddy turbo boost controler and my boost gauge on the 12V ignition wire and I don't know what happen, maybe a short or something but now when I put the key at ON position I get nothing ! no accessory lights on the console, no speedo, no juice

I checked all the fuses near the kick panel and the main 120 AMP near the battery and they are ok.

What's wrong ! Help !
Thanks
Carl

 

Ok then NVM the PM, but does it even turn over?

 

Yeah, do you have any power at all? for anything?

If nothing check the main fuses under the hood.. also anyone know if the FD had fuesable links?


-Zach

 

Yes everything else works : Power windows, A/C, driving lights, wipers etc...

I found that when I put the key on ACC it dosen't give juice anywhere so it between my Ignition and battery, what should I check? please help !

-Carl

 

How did you check the fuses? do you have a continuity tester?

if the car will net turn over it could also be the ignition got screwed up. but i will check all the fuses first with a contenuity tester.

-Zach

 

is is definitely something with your ignition wire under the dash. check to make sure it is not disconnected or grounded. both of those could cause these symptoms. don't worry, it is something simple.

 

Ok, I might be a dumbass for mentioning this, but did you disconnect your battery? Maybe it isn't reconnected...........

 

Ok guys I fixed my problem, it was a ground wire that was not well connected and it was always blowing my METER fuse.

It was just a stupid ground wire !!!!

Thanks again for your help !
-Carl