i need a few pics of electrical connectors from the wiring harness
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: pittsburgh, pa
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
i need a few pics of electrical connectors from the wiring harness
i need a few pics or wires colors for the solenoids and other things listed below..
smog pump
A/C compressor
waste gate control
yurbo precontrol
turbo control
double throttle control
purge control
smog pump
A/C compressor
waste gate control
yurbo precontrol
turbo control
double throttle control
purge control
#4
40k worth of fail
iTrader: (5)
Join Date: Mar 2001
Location: Hermosa Beach, CA
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Well it turns out that I got a little busy. What exactly do you need these for? Are you trying to match them up? If so, the ones for solenoids on the rack are in the correct order on the harness -- all you have to do is either match the solenoid with a colored sticker to the correct color ... or you can look at the vacuum diagram on page F-10 of the shop manual and match things up there (by counting places and harnesses). All of the other harnesses are keyed so that they'll only go onto the correct spot ... usually.
#5
Full Member
Thread Starter
Join Date: Nov 2001
Location: pittsburgh, pa
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
i have to rewrap my harness and was gonna remove all the connectors that i don't need..
i allready removed the solenoid rack and ACV connectors
looking to remove the air pump, purge,waste gate control,turbo precontrol, and all the otheres that i won't need
i allready removed the solenoid rack and ACV connectors
looking to remove the air pump, purge,waste gate control,turbo precontrol, and all the otheres that i won't need
#6
40k worth of fail
iTrader: (5)
Join Date: Mar 2001
Location: Hermosa Beach, CA
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Ahhhhh ... OK. Well if you can match those orders up on the rack then you can figure those out that way. My air pump harness is gray, I just taped it off. You should be able to figure out what it is because it'll fit the air pump (if you still have that laying around. The two that go to turbo control/wastegate pairing are black and right beside each other. I think you should be able to deduce what is what. If not, I can see what else I can do.
#7
Full Member
Thread Starter
Join Date: Nov 2001
Location: pittsburgh, pa
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
well, the ting it, i removed all the wrap, so nothing is were is should be..
i need the colors of the wires coming from the ecu connectors more then anything.. that way, i know what ones i can cut..
i guess i need a wiring diagram from the shop manual..
i need the colors of the wires coming from the ecu connectors more then anything.. that way, i know what ones i can cut..
i guess i need a wiring diagram from the shop manual..
Trending Topics
#8
40k worth of fail
iTrader: (5)
Join Date: Mar 2001
Location: Hermosa Beach, CA
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Hahaha ... OK. Well my connectors are tied up, but I'll see if I can tell what color the stickers are on my leftover cut up solenoid rack. I'll take pictures of the rest for you ... I think.
#9
40k worth of fail
iTrader: (5)
Join Date: Mar 2001
Location: Hermosa Beach, CA
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
OK ... the double throttle is green. I have a qestion, though ... I was looking at what you need and I'm baffled as to why you aren't needing to know what's the rest of the solenoid rack? You just have double throttle. Everything else are the other 4 solenoids floating around -- those are gonna be a bit hard for me to picture -- especially the turbo control. So are the solenoids listed ones that you're keeping? That's my guess ... but if you're going parallel then you don't need the turbo control and pre-control.
#10
Full Member
Thread Starter
Join Date: Nov 2001
Location: pittsburgh, pa
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
i removed the solenoid rack wires already.. the ones i have listed are the ones i want to get rid of, it's just that i have no wat of knowng what ones are for what..
thanks for your help!
thanks for your help!
#11
40k worth of fail
iTrader: (5)
Join Date: Mar 2001
Location: Hermosa Beach, CA
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
OK ... so you're dumping the charcoal canister (purge control)?! You do know that's gonna hurt your gas mileage, right? I have some pictures coming up ... just give me a few minutes.
#12
40k worth of fail
iTrader: (5)
Join Date: Mar 2001
Location: Hermosa Beach, CA
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
OK, Scott ... I have pictures for you, but for some strange reason my camera software decided to take it in the ***. It won't pull the stuff off of the camera -- it'll show it, but it won't pull it. I'll try to reinstall it later today and have the pictures for you soon. I'll PM them to you since I keep my stuff on the DL.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM