I have successfully install the Sparco Torinos seats in my FD
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: Philadelphia
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
I have successfully install the Sparco Torinos seats in my FD
Took me half a day to install the seats using the stock brackets, no aftermarket sliders needed and all you need is a couple of tools and patient. The good thing is no welding needed, I notice that the driver side is easier to work with compare to the passenger because the floor on the pasenger side is different from the driver side. It was so close that the shoulder of the seats nearly touch the door. I was impressed by the fitment of the seats. I would recommend that if any body are putting aftermarket seats in their 3rd gen. please be careful to measure the shoulder because seats like Evo2 would not fit because it is too wide.
#3
Temple of Cornd0g
So, you are saying the Torino seat has a better fit on the left side than the right side? That would be good as I see no need to replace the passenger's leather seat; it's comfortable enough. When I go to the track, I plan on removing the passenger seat anyway as the FD ain't no rally car.
Thread
Thread Starter
Forum
Replies
Last Post