How many of you guys have a butt-load of uninstalled performance parts just sitting..
Originally Posted by Mark McGuire
Only 25 things left to install:
Mini-battery kit
V-mount Intercooler and Radiator
Silicon radiator hoses
dual oil coolers
Tri-Point swaybar
99spec rear calilpers
929 Master Cylinder
StopTech front brakes
braided brake lines
Brake ducts + hose
Effiny Y-pipe
Greddy elbow
Intake piping
Solenoid replacement
Fuel Pressure regulator
Fuel Pressure guage
Temp Guage
Oil Pressure Guage
Al AST
Modified primary injector housing for 850s
Secondary fuel rail
Bosch 1680cc fuel injectors, ballast, connectors
Magnecor spark plug wires
Spark plugs
RP competition fuel pump
And I still need more stuff!
Mini-battery kit
V-mount Intercooler and Radiator
Silicon radiator hoses
dual oil coolers
Tri-Point swaybar
99spec rear calilpers
929 Master Cylinder
StopTech front brakes
braided brake lines
Brake ducts + hose
Effiny Y-pipe
Greddy elbow
Intake piping
Solenoid replacement
Fuel Pressure regulator
Fuel Pressure guage
Temp Guage
Oil Pressure Guage
Al AST
Modified primary injector housing for 850s
Secondary fuel rail
Bosch 1680cc fuel injectors, ballast, connectors
Magnecor spark plug wires
Spark plugs
RP competition fuel pump
And I still need more stuff!
my parts list consists of.....drum roll....methanol/water injection kit...k done.
cusco 4-point rollbar (anyone local wanna buy it?)
cusco front strut bar (titanium) (why the hell did i buy this when i have the r1 brace(-_-; )
cusco rear strut bar (carbon)
cusco rear v-brace
cusco twin plated clutch
pillow ball
rx7 diff mounts
engine mounts
used mazdaspeed 350mm steering wheel (anyone know a good place to re-leather it?)
cusco front strut bar (titanium) (why the hell did i buy this when i have the r1 brace(-_-; )
cusco rear strut bar (carbon)
cusco rear v-brace
cusco twin plated clutch
pillow ball
rx7 diff mounts
engine mounts
used mazdaspeed 350mm steering wheel (anyone know a good place to re-leather it?)
Last edited by rlee429; Apr 27, 2006 at 11:22 PM.
3rd motors a charm I hope
Joined: Apr 2003
Posts: 2,054
Likes: 0
From: Central New York
lol, its amazing how many of us dont get around to installing the parts we cant wait to purchase. While my list is small, i have had these parts for like a year, lol.
99 spec wing with carbon fiber center section
r1 front lip spoiler
feed sideskirts
99 spec wing with carbon fiber center section
r1 front lip spoiler
feed sideskirts
Joined: Mar 2001
Posts: 30,807
Likes: 648
From: FL-->NJ/NYC again!
Originally Posted by GoodfellaFD3S
FD:
1.Gotham dual oil cooler kit
2.Nardi JDM steering wheel
3.newer stock seatbelts
4.full pillow ball and seal set
5.99 spec brakes, front and rear (fronts most likely won't fit with my Fikses)
6.Apexi BNR32 Fuel pump, plus hotwiring it
7.RE toe links and trailing arms
8.RB sway bars, front and rear
9.4.3 gears
10.TII diff
11.RP diff bushings
The car is going in the shop on wedn to have the last 5 pieces installed, and the fuel pump/hotwire and steering wheel install will hopefully happen this weekend. I am not looking forward to the oil cooler install at all.
Anyone with non-Fikse 17-18 inch rims want to buy my 99 spec brakes in case they don't fit
Vert:
12.rear antenna
13.newly cleaned stock fuel injectors
14.used (but in perfect condition) oem top with frame
15.transmission that doesnt have a bad bearing
The vert is on the back burner for now.
1.Gotham dual oil cooler kit
2.Nardi JDM steering wheel
3.newer stock seatbelts
4.full pillow ball and seal set
5.99 spec brakes, front and rear (fronts most likely won't fit with my Fikses)
6.Apexi BNR32 Fuel pump, plus hotwiring it
7.RE toe links and trailing arms
8.RB sway bars, front and rear
9.4.3 gears
10.TII diff
11.RP diff bushings
The car is going in the shop on wedn to have the last 5 pieces installed, and the fuel pump/hotwire and steering wheel install will hopefully happen this weekend. I am not looking forward to the oil cooler install at all.
Anyone with non-Fikse 17-18 inch rims want to buy my 99 spec brakes in case they don't fit
Vert:
12.rear antenna
13.newly cleaned stock fuel injectors
14.used (but in perfect condition) oem top with frame
15.transmission that doesnt have a bad bearing
The vert is on the back burner for now.
someone should start a thread on how many parts been broken and changed out on their fd and how much of that broken stuff is still sitting around with their other new/used oem/aftermarket parts waiting to be installed........
LS1 powered
Joined: Feb 2002
Posts: 92
Likes: 0
From: Nashville, TN
I have bunch of stock parts laying around from various cars that I've owned, but I usually start installing the aftermarket performance parts on the very first day I receive it. it usually gets done on the first day unless it's a bigger project that requires longer time to install.
proper motoring
Joined: Jan 2004
Posts: 1,706
Likes: 1
From: USA
i had a bunhc of stuff (rad, cluthc, flywheel, coolant hoses, thermostat, etc.) laying around but they all are installed as of this past weekend with the exception of some DEFI D-gauges and the A-pillar pod for them, but that's going to take a bit of work before they are all "prepped" for install (trying to make everything look like it was there from the factory).
127,338 OEM, 11.5psi
Joined: Jun 2005
Posts: 936
Likes: 0
From: MARYLAND
Uninstalled Parts
*full T-t8 Kit
*sard Racing Bov
*denso Supra Fuel Pump
*exedy Hyper Singal Clutch/flywheel
*polished Intake - I/c Pipes
*knightsport double fin wing
*clifford Matrix Car Alarm
*sard Racing Bov
*denso Supra Fuel Pump
*exedy Hyper Singal Clutch/flywheel
*polished Intake - I/c Pipes
*knightsport double fin wing
*clifford Matrix Car Alarm
Last edited by 7 BOUND; Aug 31, 2006 at 09:12 PM. Reason: ADD ON
Full Member
Joined: Feb 2005
Posts: 113
Likes: 0
From: San Mateo, CA
My List
Uninstalled parts:
Big Brake Master Cylinder Kit:
929 Master Brake Cylinder
Adjustable Proportion valve for Brakes
SS Brake Lines
2 piece Intake Gaskets
Vacuum Hoses Kit - Hose Techniques
HKS Ground Wires and Volt. Stabilizer
Gaskets for Front Intake Leak
FrontOil Seal gasket
Front License Plate Kit
Big Brake Master Cylinder Kit:
929 Master Brake Cylinder
Adjustable Proportion valve for Brakes
SS Brake Lines
2 piece Intake Gaskets
Vacuum Hoses Kit - Hose Techniques
HKS Ground Wires and Volt. Stabilizer
Gaskets for Front Intake Leak
FrontOil Seal gasket
Front License Plate Kit
silicone vacuum hoses
ss brake lines
hawk brake pads
speed bleeders
ngk plat plugs
ngk spark wires
fuel filter
viton check valves
amsoil tranny/diff oil
and im going back to school soon, sigh...
ss brake lines
hawk brake pads
speed bleeders
ngk plat plugs
ngk spark wires
fuel filter
viton check valves
amsoil tranny/diff oil
and im going back to school soon, sigh...
-APEX'i FMIC
-Fluidyne Radiator
-K2RD Secondary Fuel Rails
-1600 Injectors
-Aeromotive FPR
-Brembo Rotors, brake pads
-Fuel Pump
-Battery Relocation Kit
-Greddy Pulley Kit
-Goodridge SS brake lines
-Bonez Midpipe
Yea.... I think thats it for now..
-Fluidyne Radiator
-K2RD Secondary Fuel Rails
-1600 Injectors
-Aeromotive FPR
-Brembo Rotors, brake pads
-Fuel Pump
-Battery Relocation Kit
-Greddy Pulley Kit
-Goodridge SS brake lines
-Bonez Midpipe
Yea.... I think thats it for now..
Last edited by kevinvr6; Sep 1, 2006 at 07:49 AM.
EMPEROR
Joined: Nov 2002
Posts: 561
Likes: 0
From: Aumsville, OR
Here we go:
- Brembo sloted/crossed drilled rotors
- PBR Pads
- S/S lines
- V-Mount Intercooler
- PFC that needs tuned
- AST Eliminator
- Fuel Filter (OEM)
- KS Spoiler
- RE A. Full Widebody Kit
- Spare Longblock and Tranny
and . . . thats all I can think of off the top of my head . .
~ Justus
- Brembo sloted/crossed drilled rotors
- PBR Pads
- S/S lines
- V-Mount Intercooler
- PFC that needs tuned
- AST Eliminator
- Fuel Filter (OEM)
- KS Spoiler
- RE A. Full Widebody Kit
- Spare Longblock and Tranny
and . . . thats all I can think of off the top of my head . .
~ Justus
Mentos and Magnums
Joined: Apr 2005
Posts: 3,373
Likes: 0
From: FLROIDUH
in my garage, under my bed, my hatch, my closet are all full of...
99spec wing
99spec front
act 9.5 fly whl
clutch, TOB, PB
ACT PP
feed pulleys
poly MM
Greddy boost controller
turbos
instruments
AST
Greddy elbow
rad caps
counter weight
PFC
comander
datalogit
99spec wing
99spec front
act 9.5 fly whl
clutch, TOB, PB
ACT PP
feed pulleys
poly MM
Greddy boost controller
turbos
instruments
AST
Greddy elbow
rad caps
counter weight
PFC
comander
datalogit
Mentos and Magnums
Joined: Apr 2005
Posts: 3,373
Likes: 0
From: FLROIDUH
Oh yeah...
...Midpipe(resonated
calipers
pads
CF MS lip
ported wastegate and non sequential mods done on spare set
wires, plugs, FF
and some i forgot. The only reasons they lie dormant is that my car runs soooooo well im afraid to jinx it and i want to get a fuel system and do it all at once.
...Midpipe(resonated
calipers
pads
CF MS lip
ported wastegate and non sequential mods done on spare set
wires, plugs, FF
and some i forgot. The only reasons they lie dormant is that my car runs soooooo well im afraid to jinx it and i want to get a fuel system and do it all at once.
Sell your Inventory?
Damn this thread again? lol
Well my parts
JDM rear seat (waiting on it to arrive actually)
Battery relocation (gonna wait for the rear seat to come in first)
misc int. panels
JIC strut bar
HKS dp with new o2 sensor (might go wideband since i have to get in there anyway, dont know yet)
Well my parts
JDM rear seat (waiting on it to arrive actually)
Battery relocation (gonna wait for the rear seat to come in first)
misc int. panels
JIC strut bar
HKS dp with new o2 sensor (might go wideband since i have to get in there anyway, dont know yet)
Mentos and Magnums
Joined: Apr 2005
Posts: 3,373
Likes: 0
From: FLROIDUH
Originally Posted by ddkkww888
Well, I m not sure this is the right place (thread),
But I'm in the market for a rear wing/spoiler (red)
for a FD3.
But I'm in the market for a rear wing/spoiler (red)
for a FD3.