new turbos
m2 intake
hks dp
petit high flow cat
apex n1 dual exhaust
walbro 255 fuel pump
greddy smic.
re anemia ecu good up to 1 bar.

motor in good condition.

what is safe?

what is max?

i just got an apex avcr.

thanks

 

whatever is safe for the turbos, I believe those are probably the limiting factors in your setup.

 

I would say a reliable 14 psi would be good for you. Just be careful and have fun!

 

Depending on how the RE ecu is tuned, you will be likely approaching 100% injector duty at 13-14 psi. I wouldn't go over 13 psi regularly. For example, right now on my untuned PFC base map, I am hitting a peak of 91% injector duty in the higher gears near redline at 13 psi.

 

14psi is not safe on stock injectors. I'm ommiting myself to 12psi at the moment with similar mods as you but I do have stock IC for now.

 

Ditto on the 12 psi. Steve Kan tuned my car less than a week ago, and I'm seeing about 95% injector duty at redline with 12 psi. I wouldn't wanna push it any higher than that, and Steve didn't.

 

12 psi is perfectly safe, it just depends on your injector duty. Some people can run 15 all the time fine. Just figure out what your actually car is running, then decide. Dont take other people's advice, because that is purely dependant on their car.