(First of all if there is a site that can explain this or an earlier post plz send link cuz i cant find anything that explains it.) I read all the threads about bov's n such and i see some ppl say that u can make the stock one louder. How exactly do i do this?

 

Are you asking about venting the stock BOV to atomsphere?

 

yes

 

Just remove the hose that connects the stock airbox to the BOV. Use something to cover the empty connection on the back of the airbox and away you go.

 

attached a speaker that makes the pshhhh sound.. you'll sound so cool

 

i hgear that bov can ruin turbos if you make the pressure on the bov not release till it get really backed up. if you do this with a stock bov does it hurt the engine.

 

Plumb the bov in through the passenger window, get a cellphone headset and hang it from there.

 

Ha

 

also make sure you filter the stock bov as it sucks in air during vac

 

This is why rotarys dont last! people are always doing things to there cars like this! if mazda thought that venting it to the outside of the intake was better, they would have..its little thing like this that hurt the car and the value of the car.

 

OO and dont get me wrong, Ive got a ls6 in my car but it's a drag car!!

 

I don't agree with this at all. Mazda gave us the stock precat, stock intercooler and stock AST. They were a bit handcuffed by such parameters as emissions, NVH (sound) reduction and weight reduction.

Boosted rotaries don't last because of overheating and detonation, period.

You will be fine venting the BOVs to atmosphere. Over the last 6 years and 80k miles I have had both filtered and unfiltered stock BOVs and have noticed absolutely no problems.

 

im trying to vent and my car wants to stall as if i have a vac leak...? and yes the air box is plugged up.

 

buy some q-tips

 

put a duck call on it! i did it sounds great. qqquuuuuuaaaaaakkkkkkkkkkkkkk!!!!!!!!!!

 

that was the first time i have really cracked up laughing on this site, thanks

 

rofl that is hilarious. omg thats great. so can someone send me a picture of which one is the blowoff valve hose im new to this rx7 stuff. and what should i plug the airbox with?

 

BOV is the hose leading to the y-pipewhere the "Y" meets....

 

i was new once all u have to do is look at the vacum wireing diagram on ur hood and see where it is.

 

LOL. I did that too. Its Halarious!!

 

you laugh because you think i'm joking. i laugh because it scares the **** out of people who think a duck is going to fly into them! if you live in texas or anywhere where it's ok for people to ride there bikes (lance armstrong wanna bees) then you know how funny this can be. just make sure to mount the call somewhere where it won't get the full heat of the engine bay. like use a 3/4" heater hose and mount the call itself near the front tire. and besure to cut/drill a few "bleeder holes" for the pressure to vent out a little. otherwise to sounds like a pregant yake (rosie ol' fat ***).

 

Keep reading. You'll get there

 

Lol ^^^^