Well I've just finished my install of the turbo control solenoid upgrade. Pulled a lot of information from different threads here and there. Figured I would share my write up in case it is useful to anyone.
I had to upload it to Google drive since it was too large to attach here.

https://drive.google.com/file/d/1Hwe...ew?usp=sharing

Hopefully this works.

 

Good write up. How are your results?

 

 

Whats different than this AzEknights solenoid kit ?

 

Well, the fact that you can do it yourself and save $250. Also I've never seen an AzEknight solenoid install write up. I also replaced the fuel pressure regulator solenoid which is not included in the AzEknight kit. I am thankful to him and others for the information I could find on the solenoids, but ultimately never found one specific thread that made me feel confident in replacing them. So I compiled all of the information I found to share with others. That's all, not trying to steal anyones thunder. I mentioned AzEknight in like the first two sentences of the write up.

 

https://www.rx7club.com/group-buy-pr...d-rack-968956/

 

 

does anyone have just one of those solenoids on hand that I could buy from them by chance?

thanks,
Ben

 

They are off the shelf. In the writeup it says they are Fabco-Air 103SMG-2-M-V-12VDC .

 

if you read it, you'd know they're not off the shelf. there's lead time no matter where you buy them from, and I need one before this weekend.

Ben